Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR OUTSIDE MOULDING
RM3160E _59 Vehicle Exterior _019724 EXTERIOR PANELS / TRIM _0109644 FRONT DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR OUTSIDE MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY

HINT:

When removing the front door outside moulding sub-assembly, heat the vehicle body and front door outside moulding sub-assembly using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Front Door Outside Moulding Sub-assembly 20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body or front door outside moulding sub-assembly excessively.


a.

Disengage the 6 clips and turn back the front door outside moulding sub-assembly as shown in the illustration.

B362537


b.
B362539

Remove the hole plug.


c.
B362540

Remove the nut.


d.
B362541
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the front door outside moulding sub-assembly as shown in the illustration.


e.

Disengage the 10 clips and separate the double-sided tape to remove the front door outside moulding sub-assembly.

B362542
5.625,1.615 6.188,1.99 true 6.229,1.917 6.542,2.073 0.313,0.156 10 false *a
*a Double-sided Tape - -



f.

Remove the 10 clips.


g.

Remove the gasket.


Hide 75793 2.REMOVE FRONT DOOR UPPER OUTSIDE MOULDING PAD

a.

Remove the front door upper outside moulding pad.

B364575