Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR OUTSIDE MOULDING
RM3160E _59 Vehicle Exterior _019724 EXTERIOR PANELS / TRIM _0109646 REAR DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR OUTSIDE MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75078 1.REMOVE REAR DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY

HINT:

When removing the rear door lower outside moulding sub-assembly, heat the vehicle body and rear door lower outside moulding sub-assembly using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Door Lower Outside Moulding Sub-assembly 20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body or rear door lower outside moulding sub-assembly excessively.


a.
B362544

Remove the screw.


b.

Remove the 2 clips.


c.
B362545

Disengage the clip and turn back the rear door lower outside moulding sub-assembly as shown in the illustration.


d.
B362547
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the rear door lower outside moulding sub-assembly as shown in the illustration.


e.
B362548
3.104,1.125 2.885,0.896 true 3.125,1.042 3.406,1.271 0.281,0.229 10 false *a
*a Double-sided Tape


Disengage the 5 clips and separate the double-sided tape to remove the rear door lower outside moulding sub-assembly.


Hide 2.REMOVE REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY

HINT:

When removing the rear door outside moulding sub-assembly, heat the vehicle body and rear door outside moulding sub-assembly using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Door Outside Moulding Sub-assembly 20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body or rear door outside moulding sub-assembly excessively.


a.
B362549

Disengage the 4 clips and turn back the rear door outside moulding sub-assembly as shown in the illustration.


b.
B362550

Remove the hole plug.


c.
B362551

Remove the nut.


d.
B361238
1.281,0.938 1.552,1.031 false
V100155

Protective Tape


Apply protective tape around the rear door outside moulding sub-assembly as shown in the illustration.


e.
B361239
1.646,2.469 2.052,1.969 true 1.5,2.385 1.813,2.542 0.313,0.156 10 false *a
*a Double-sided Tape


Disengage the 8 clips and separate the double-sided tape to remove the rear door outside moulding sub-assembly.


f.

Remove the 8 clips.


g.

Remove the gasket.


Hide 75797 3.REMOVE REAR DOOR UPPER OUTSIDE MOULDING PAD

a.

Remove the rear door upper outside moulding pad.

B364576