Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › WHEEL OPENING MOULDING(for Front Side)
RM3160E _59 Vehicle Exterior _019724 EXTERIOR PANELS / TRIM _0109648 WHEEL OPENING MOULDING(for Front Side) A

EXTERIOR PANELS / TRIM  WHEEL OPENING MOULDING(for Front Side)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 76622C 1.REMOVE FRONT FENDER MUDGUARD (w/ Mudguard)

Hide 75086 2.REMOVE FRONT FENDER WHEEL OPENING MOULDING SUB-ASSEMBLY

HINT:

When removing the front fender wheel opening moulding sub-assembly, heat the vehicle body and front fender wheel opening moulding sub-assembly using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Front Fender Wheel Opening Moulding Sub-assembly 20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body or front fender wheel opening moulding sub-assembly excessively.


a.
B361058
2.802,1.49 3.042,1.49 true 3.094,1.396 3.292,1.573 0.198,0.177 10 true *1 1.302,2.104 1.49,2.26 0.188,0.156 10 true *a
*1 Pin Hold Clip
*a 90°


Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.


b.

Remove the 2 screws.


c.

Remove the clip.


d.

w/o Mudguard:

i.
B361060

Remove the 2 screws.


ii.

Remove the 6 clips.



e.

w/ Mudguard:

i.
B363149

Remove the 5 clips.



f.
B367881
0.885,0.333 1.198,0.49 0.313,0.156 10 false *a
*a Push


Pull back the edge of the front fender liner and disengage the 4 claws by pushing the area indicated by the arrow in the illustration with a finger.

NOTICE:
·

Do not apply excessive force when pulling back the front fender liner.

·

To avoid damaging the claws, do not forcibly pull the front fender wheel opening moulding sub-assembly.




g.
B361057
0,0 0,0 false
V100155

Double-sided Tape


Disengage the 8 clips and separate the double-sided tape to remove the front fender wheel opening moulding sub-assembly with front fender moulding sub-assembly.


h.
B361056

Disengage the 2 claws and remove the front fender moulding sub-assembly.


Hide 75793 3.REMOVE FRONT DOOR UPPER OUTSIDE MOULDING PAD

a.
B365106

Remove the front door upper outside moulding pad.