Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › WHEEL OPENING MOULDING(for Rear Side)
RM3160E _59 Vehicle Exterior _019724 EXTERIOR PANELS / TRIM _0109649 WHEEL OPENING MOULDING(for Rear Side) A

EXTERIOR PANELS / TRIM  WHEEL OPENING MOULDING(for Rear Side)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75874 1.INSTALL QUARTER PANEL WHEEL OPENING MOULDING

a.
B408133

Engage the 4 clips.


b.

Engage the 4 claws.


c.

Install the 4 clips.


d.

w/o Mudguard:

i.

Install the quarter panel wheel opening moulding with the 3 screws.



e.

w/ Mudguard:

i.

Install the quarter panel wheel opening moulding with the 2 screws.



Hide 76626D 2.INSTALL REAR QUARTER PANEL MUDGUARD (w/ Mudguard)