Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › QUARTER PANEL WHEEL OPENING MOULDING
RM3160E _59 Vehicle Exterior _019724 EXTERIOR PANELS / TRIM _0109650 QUARTER PANEL WHEEL OPENING MOULDING A

EXTERIOR PANELS / TRIM  QUARTER PANEL WHEEL OPENING MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75874 1.DISCONNECT QUARTER PANEL WHEEL OPENING MOULDING

a.
B404760

Remove the screw.


b.

Remove the 2 clips.


c.
B404759

Disengage the 4 clips and disconnect the quarter panel wheel opening moulding.


Hide 61668C 2.REMOVE NO. 2 QUARTER PANEL SEAL

HINT:

When removing the No. 2 quarter panel seal, heat the vehicle body and No. 2 quarter panel seal using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
No. 2 Quarter Panel Seal 20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body or No. 2 quarter panel seal excessively.


a.
B362655C01
0,0 0,0 false
V100155

Double-sided Tape


Remove the 4 screws.


b.

Remove the grommet.


c.

Separate the double-sided tape to remove the No. 2 quarter panel seal.