Home › Engine / Hybrid System › 1AR-FE COOLING › THERMOSTAT
RM3160E _51 Engine / Hybrid System _019676 1AR-FE COOLING _0109791 THERMOSTAT A

1AR-FE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

a.

Install a new gasket to the thermostat.


b.
A194954C07
1.552,0.906 2.167,1.656 2.167,1.656 2.375,1.656 false 2.438,1.552 2.75,1.708 0.313,0.156 10 false *a 1.625,0.25 1.938,0.406 0.313,0.156 10 false *b 1.24,0.26 1.552,0.417 0.313,0.156 10 false *b
*a Jiggle Valve
*b 10°


Install the thermostat to the water inlet housing.

NOTICE:

The jiggle valve may be set within 10° on either side of the prescribed position.



Hide 16321 2.INSTALL WATER INLET

a.

Install the water inlet with the 2 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)