Home › Engine / Hybrid System › 1AR-FE COOLING › COOLING FAN MOTOR
RM3160E _51 Engine / Hybrid System _019676 1AR-FE COOLING _0109792 COOLING FAN MOTOR A

1AR-FE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363A 1.INSTALL NO. 2 COOLING FAN MOTOR

a.

Install the No. 2 cooling fan motor with the 3 screws.

Torque:
2.6 N*m (27 kgf*cm, 23 in.*lbf)


b.

Connect the No. 2 cooling fan motor connector and engage the wire harness to the 2 clamps.


Hide 16363 2.INSTALL COOLING FAN MOTOR

a.

Install the cooling fan motor with the 3 screws.

Torque:
2.6 N*m (27 kgf*cm, 23 in.*lbf)


b.

Connect the cooling fan motor connector and engage the wire harness to the 2 clamps.


Hide 16361B 3.INSTALL NO. 2 FAN

NOTICE:

Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.


a.

Install the No. 2 fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16361 4.INSTALL FAN

NOTICE:

Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.


a.

Install the fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 5.INSTALL FAN SHROUD ASSEMBLY

a.

Engage the 3 guides.


b.

Engage the 3 claws to install the fan shroud assembly to the radiator assembly.

NOTICE:

Do not damage the radiator assembly when installing the fan shroud assembly.



c.

Engage the 4 wire harness clamps.


d.

Connect the cooling fan ECU connector.


Hide 32941 6.CONNECT INLET NO. 1 OIL COOLER HOSE

a.

Engage the clamp to connect the inlet No. 1 oil cooler hose to the fan shroud.


Hide 7.CONNECT RADIATOR RESERVE TANK HOSE

a.

Connect the radiator reserve tank hose.


Hide 16571C 8.CONNECT NO. 1 RADIATOR HOSE

a.

Connect the No. 1 radiator hose and slide the clip to secure it.


Hide 53205 9.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

Hide 17750A 12.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 51441 16.INSTALL NO. 1 ENGINE UNDER COVER