Home › Engine / Hybrid System › 1AR-FE COOLING › COOLING FAN ECU
RM3160E _51 Engine / Hybrid System _019676 1AR-FE COOLING _0109793 COOLING FAN ECU G

1AR-FE COOLING  COOLING FAN ECU  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK COOLING FAN SYSTEM

a.

Check and ensure the following conditions:

i.

The ignition switch is off.


ii.

The engine coolant temperature is less than 92°C (198°F).


iii.

The battery voltage is between 11 to 14 V.


iv.

The A/C switch is off.



b.

Connect the pickup of a clamp-on ammeter around one of the 2 wires for the cooling fan motor.


c.

Turn the ignition switch to ON and wait for approximately 10 seconds. Check that the fan is not operating.


d.

Start the engine. Check that the fan is not operating with the engine idling.

HINT:
·

Make sure that the engine coolant temperature is less than 92°C (198°F).

·

Turn the A/C switch off.




e.

Check that the fan operates when the A/C switch is turned on.


f.

Measure the current while the cooling fan motor is turning.

Standard Current:
Item Condition Specified Condition
Cooling fan motor Battery voltage applied at 20°C (68°F) 13.6 to 19.6 A
No. 2 cooling fan motor 13.6 to 19.6 A


HINT:

The engine coolant temperature should be less than 92°C (198°F).



g.

Check that the fan operates when the water temperature sensor connector is disconnected.


h.

Measure the current while the cooling fan motor is turning.

Standard Current:
Item Condition Specified Condition
Cooling fan motor Battery voltage applied at 20°C (68°F) 13.6 to 19.6 A
No. 2 cooling fan motor 13.6 to 19.6 A



i.
A320310
0.063,0.063 0.375,0.219 0.313,0.156 10 false *a 0.333,0.813 0.646,0.969 0.313,0.156 10 false *b 0.344,1.354 0.656,1.51 0.313,0.156 10 false *c 0.354,2.229 0.667,2.385 0.313,0.156 10 false *d 0.333,2.76 0.646,2.917 0.313,0.156 10 false *e 0.052,1.74 0.365,1.896 0.313,0.156 10 false *f 1,3.344 1.313,3.542 0.313,0.198 10 false 92 1.375,3.344 1.688,3.542 0.313,0.198 10 false 94 1.927,3.344 2.24,3.542 0.313,0.198 10 false 97 2.427,3.333 2.74,3.531 0.313,0.198 10 false 100 2.813,3.333 3.125,3.531 0.313,0.198 10 false 102 0.948,3.583 1.26,3.781 0.313,0.198 10 false 198 1.333,3.583 1.646,3.781 0.313,0.198 10 false 201 1.885,3.583 2.198,3.781 0.313,0.198 10 false 207 2.823,3.583 3.135,3.781 0.313,0.198 10 false 216 2.438,3.583 2.75,3.781 0.313,0.198 10 false 212 3.115,3.323 3.396,3.594 0.281,0.271 10 false (°C) 3.125,3.573 3.427,3.854 0.302,0.281 10 false (°F)
*a Operating Diagram
*b MAX HI
*c HI
*d LO
*e OFF
*f Fan Speed


After the engine is warmed up, check that the fan operates as shown in the illustration.

HINT:
·

The engine coolant temperature at which the fan starts operating is approximately 94°C (201°F).

·

This system can also be checked using the GTS.

Enter the following menus: Powertrain / Engine / Data List / Coolant Temp.



Powertrain > Engine > Data List
Tester Display
Coolant Temp
50003 234 8