Home › Engine / Hybrid System › 2GR-FE COOLING › COOLING FAN MOTOR › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019667 2GR-FE COOLING _0109800 COOLING FAN MOTOR G

2GR-FE COOLING  COOLING FAN MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16363 1.INSPECT COOLING FAN MOTOR

a.

Disconnect the cooling fan motor connector.


b.
A255684C16
1.969,1.438 2.531,1.438 false 0.885,1.438 1.448,1.438 false 0.083,0.063 0.292,0.281 0.208,0.219 10 false *a 2.594,1.354 2.833,1.573 0.24,0.219 10 false (+) 0.698,1.365 0.938,1.583 0.24,0.219 10 false (-)
*a Component without harness connected
(Cooling Fan Motor)


Check that the cooling fan motor operates smoothly when the battery is connected to the cooling fan motor connector.


c.

Measure the current while the cooling fan motor is operating.

Standard Current:
Condition Specified Condition
Battery voltage applied at 20°C (68°F) 26.0 to 32.0 A


If the result is not as specified, replace the cooling fan motor.


d.

Connect the cooling fan motor connector.


Hide 16363A 2.INSPECT NO. 2 COOLING FAN MOTOR

a.

Disconnect the No. 2 cooling fan motor connector.


b.
A255683C12
1.979,1.375 2.542,1.375 false 0.875,1.365 1.448,1.365 false 0.073,0.031 0.281,0.25 0.208,0.219 10 false *a 2.615,1.271 2.854,1.49 0.24,0.219 10 false (+) 0.646,1.26 0.885,1.479 0.24,0.219 10 false (-)
*a Component without harness connected
(No. 2 Cooling Fan Motor)


Check that the No. 2 cooling fan motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.


c.

Measure the current while the No. 2 cooling fan motor is operating.

Standard Current:
Condition Specified Condition
Battery voltage applied at 20°C (68°F) 26.0 to 32.0 A


If the result is not as specified, replace the No. 2 cooling fan motor.


d.

Connect the No. 2 cooling fan motor connector.