Home › Drivetrain › U660F AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM › 2013.12–2016.11
RM3160E _52 Drivetrain _019726 U660F AUTOMATIC TRANSMISSION / TRANSAXLE _0109808 AUTOMATIC TRANSAXLE SYSTEM U

U660F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  TERMINALS OF ECU  


TCM


C133222
3.385,0.094 3.781,0.333 0.396,0.24 3.5,0.125 3.781,0.302 0.281,0.177 10 false C3

HINT:

The standard voltage between each pair of TCM terminals is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the TCM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C3-15 (R) - C3-8 (E1) L - BR R shift position switch signal Ignition switch ON and shift lever in R 11 to 14 V
Ignition switch ON and shift lever in any position except R Below 1 V
C3-16 (D) - C3-8 (E1) G - BR D shift position switch signal Ignition switch ON and shift lever in D and S 11 to 14 V
Ignition switch ON and shift lever in any position except D and S Below 1 V
C3-12 (STP) - C3-8 (E1) GR - BR Stop light switch signal Brake pedal is depressed 7.5 to 14 V
Brake pedal is released Below 1.5 V
C3-11 (NSW) - C3-8 (E1) R - BR Park/neutral switch signal Ignition switch ON and shift lever in P or N Below 2 V
Ignition switch ON and shift lever in any position except P or N 11 to 14 V
C3-10 (STA) - C3-8 (E1) Y - BR Starter signal Cranking (shift lever in P or N, ignition switch START) 11 to 14 V
Ignition switch ON and shift lever in any position except P or N Below 2 V
C3-3 (SPD) - C3-8 (E1) G - BR Speed signal from combination meter Vehicle driving Pulse generation
C3-1 (BATT) - C3-8 (E1) W - BR Battery (for measuring battery voltage and for TCM memory) Always 9 to 14 V
C3-13 (IGSW) - C3-8 (E1) B - BR IG signal Ignition switch ON 9 to 14 V
C3-18 (+B) - C3-8 (E1) W - BR Power source of TCM Ignition switch ON 9 to 14 V
C3-6 (CAN+) - C3-8 (E1) B - BR CAN communication line Ignition switch ON Pulse generation
C3-7 (CAN-) - C3-8 (E1) W - BR CAN communication line Ignition switch ON Pulse generation


ECM


C239275
2.448,0.354 2.844,0.594 0.396,0.24 5.896,0.354 6.292,0.594 0.396,0.24 2.573,0.396 2.844,0.573 0.271,0.177 10 false C1 5.99,0.396 6.271,0.573 0.281,0.177 10 false A43

HINT:

The standard voltage between each pair of ECM terminals is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration below as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A43-37 (S) - C1-49 (E1) LG - BR S shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in any position except S Below 1 V
A43-34 (SFTU) - C1-49 (E1) V - BR Up shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever held in "+" (Up shift) Below 1 V
A43-50 (SFTD) - C1-49 (E1) SB - BR Down shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever held in "-" (Down shift) Below 1 V