Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) › 2013.12–2016.11
RM3160E _58 Vehicle Interior _019714 HEATING / AIR CONDITIONING _0109951 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  DIAGNOSIS SYSTEM  


DESCRIPTION


Air conditioning system (for automatic air conditioning system) data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform troubleshooting.



LIST OF OPERATION METHODS


By operating each of the air conditioning control switches as shown in the diagram below, it is possible to enter diagnostic check mode.

E236715
4.604,5.083 5.052,5.344 0.448,0.26 3.042,5.083 3.531,5.344 0.49,0.26 2.677,6.458 3.177,6.719 0.5,0.26 1.354,4.198 1.802,4.458 0.448,0.26 1.344,5.625 1.792,5.885 0.448,0.26 0.5,7.854 0.948,8.115 0.448,0.26 1.406,0.583 4.354,1.417 2.948,0.833 10 false Turn the ignition switch to ON and press the A/C control assembly AUTO and recirculation/fresh switches simultaneously within 5 seconds. 4.615,1.208 6.635,1.792 2.021,0.583 10 false The AUTO and recirculation/fresh switches are not pressed simultaneously. 2.208,2.771 3.615,3.115 1.406,0.344 10 false Indicator Check (continuous operation) 2.104,4.167 3.813,4.51 1.708,0.344 10 false Sensor Check (DTC check) (continuous operation) 2.104,5.604 3.813,5.948 1.708,0.344 10 false Sensor Check (DTC check) (step operation) 4.646,5.135 5.052,5.292 0.406,0.156 10 false AUTO 3.094,5.135 3.5,5.292 0.406,0.156 10 false UP Dr 2.74,6.51 3.146,6.667 0.406,0.156 10 false UP Dr 1.458,7.188 4.427,7.344 2.969,0.156 10 false Check mode is canceled and A/C control starts 1.458,4.25 1.865,4.406 0.406,0.156 10 false OFF 1.458,5.677 1.865,5.833 0.406,0.156 10 false OFF 1,7.906 2.844,8.177 1.844,0.271 10 false : Indicates Switch Operation 0.719,8.333 2.698,8.604 1.979,0.271 10 false OFF: Blower Fan Off Switch 3.104,8.333 5.781,8.594 2.677,0.26 10 false UP Dr: Driver Side Temperature Up Switch 3.104,7.906 5.833,8.125 2.729,0.219 10 false AUTO: Automatic Air Conditioning Switch


INDICATOR CHECK


a.

Turn the ignition switch off.


b.

Turn the ignition switch to ON and press the air conditioning control assembly AUTO and recirculation/fresh switches simultaneously within 5 seconds.

E285426
0.354,0.302 0.667,0.5 0.313,0.198 12 false *A 3.938,0.354 4.25,0.552 0.313,0.198 12 false *B
*A for LHD *B for RHD



c.

The indicator check is automatically performed when panel diagnosis is activated. Check that the indicators light up and go off 4 times at 1 second intervals continuously.

HINT:
·

The sensor check automatically starts when the indicator check is completed.

·

Press the OFF switch to cancel check mode.



E285427
0.177,0.167 0.49,0.365 0.313,0.198 12 false *A 3.75,0.167 4.219,0.469 0.469,0.302 12 false *B 2.198,3.344 2.51,3.5 0.313,0.156 10 false *a 2.604,3.802 2.917,3.958 0.313,0.156 10 false *b 2.604,4.333 2.917,4.49 0.313,0.156 10 false *c 2.885,3.479 3.198,3.635 0.313,0.156 10 false *d 3.521,3.469 3.833,3.625 0.313,0.156 10 false *d 0.25,1.75 0.719,2.052 0.469,0.302 12 false *C 3.75,1.75 4.219,2.052 0.469,0.302 12 false *D
*A Air Conditioning Control Assembly (for LHD) *B Air Conditioning Control Assembly (for RHD)
*C No. 2 Air Conditioning Control Assembly (w/o Seat Heater) *D No. 2 Air Conditioning Control Assembly (w/ Seat Heater)
*a Indicator Blinking Pattern *b ON
*c OFF *d 1 Sec.




SENSOR CHECK (DTC CHECK)


a.

Perform the indicator check.

HINT:

After the indicator check is completed, the system enters DTC check mode automatically.



b.

Read the DTCs displayed on the air conditioning control assembly.

E285428
1.74,1.229 1.74,0.677 1.74,0.677 1.979,0.677 false 5.458,1.219 5.458,0.667 5.458,0.667 5.698,0.667 false 0.302,0.271 0.677,0.51 0.375,0.24 12 false *A 3.771,0.271 4.354,0.646 0.583,0.375 12 false *B 5.729,0.563 6.042,0.719 0.313,0.156 10 false *a 2.031,0.583 2.344,0.74 0.313,0.156 10 false *a
*A for LHD *B for RHD
*a Diagnostic Trouble Code (DTC) - -


NOTICE:

In sensor check mode, which is automatically entered after indicator check mode, troubleshooting may be partially performed. Be sure to perform the sensor check again.


HINT:

Refer to Diagnostic Trouble Code Chart for details of the codes.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DIAGNOSTIC TROUBLE CODE CHART

·

When there are no problems, DTC 00 is output.

·

As an example, the illustration shows that DTC 12 is output.




c.

If the DTCs are difficult to read because they change automatically, turn driver side TEMP up switch clockwise to display the DTCs one at a time so that they can be read easily. The DTCs change step by step when driver side TEMP up switch is turned clockwise.

E285429
0.313,0.26 0.688,0.5 0.375,0.24 12 false *A 3.885,0.302 4.26,0.542 0.375,0.24 12 false *B
*A for LHD *B for RHD


HINT:

Press the OFF switch to finish panel diagnosis.



d.

Clear the DTCs.

i.

During the sensor check, press the front defroster switch and rear defogger switch simultaneously.

E285430
0.26,0.229 0.635,0.469 0.375,0.24 12 false *A 3.865,0.271 4.24,0.51 0.375,0.24 12 false *B 0.281,2.021 0.656,2.26 0.375,0.24 12 false *C 3.917,2.063 4.292,2.302 0.375,0.24 12 false *D
*A for LHD (w/o Mirror Heater) *B for RHD (w/o Mirror Heater)
*C for LHD (w/ Mirror Heater) *D for RHD (w/ Mirror Heater)