Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)
RM3160E _58 Vehicle Interior _019714 HEATING / AIR CONDITIONING _0109951 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  B1417/17  Rear Evaporator Temperature Sensor Circuit  


DESCRIPTION

The No. 2 air conditioning harness assembly is installed on the evaporator in the rear air conditioner unit to detect the temperature of the cooled air that has passed through the evaporator, which is used to control the air conditioning system. It sends signals to the air conditioning amplifier assembly. The resistance of the No. 2 air conditioning harness assembly changes in accordance with the temperature of the cooled air that has passed through the evaporator. As the temperature decreases, the resistance increases. As the temperature increases, the resistance decreases.

The air conditioning amplifier assembly applies voltage (5 V) to the No. 2 air conditioning harness assembly and reads voltage changes as the resistance of the No. 2 air conditioning harness assembly changes. This sensor is used for frost prevention.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1417/17 Rear Evaporator Temperature Sensor Circuit Open or short in rear evaporator temperature sensor circuit
·

No. 2 air conditioning harness assembly

·

Harness or connector between No. 2 air conditioning harness assembly and air conditioning amplifier assembly

·

Air conditioning amplifier assembly


Memorized
(4 sec. or more)*1

*1: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.


WIRING DIAGRAM

E239162E02
0.99,1.073 3.281,1.354 2.292,0.281 10 false Rear Evaporator Temperature Sensor 0.729,2.24 3.594,2.563 2.865,0.323 10 false No. 2 Air Conditioning Harness Assembly 0.729,2.083 1.188,2.281 0.458,0.198 10 false L20 4.979,1.938 5.438,2.135 0.458,0.198 10 false F81 4.979,2.104 6.521,2.521 1.542,0.417 10 false Air Conditioning Amplifier Assembly 4.021,0.76 4.479,0.958 0.458,0.198 10 false + 4.042,1.365 4.5,1.563 0.458,0.198 10 false - 4.219,0.76 4.677,0.958 0.458,0.198 10 false 8 4.219,1.365 4.677,1.563 0.458,0.198 10 false 7 5.156,1.365 5.615,1.563 0.458,0.198 10 false 7 5.156,0.75 5.615,0.948 0.458,0.198 10 false 5 5.375,0.865 5.833,1.063 0.458,0.198 10 false TEC 5.375,1.479 5.969,1.708 0.594,0.229 10 false SGND

PROCEDURE

1.READ VALUE USING GTS
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Air Conditioner / Data List.


e.

Check the value(s) by referring to the table below.

Body Electrical > Air Conditioner > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Evap Temp Sensor (Rear) No. 2 air conditioning harness assembly Min.: -29.70°C (-21.46°F)
Max.: 59.55°C (139.19°F)
Actual rear evaporator temperature displayed -
Body Electrical > Air Conditioner > Data List
Tester Display
Evap Temp Sensor (Rear)
50003 121 55
OK:

The display is as specified in the normal condition column.



Result:
Result Proceed to
NG A
OK (When troubleshooting according to Problem Symptoms Table) B
OK (When troubleshooting according to the DTC) C



A

2.INSPECT NO. 2 AIR CONDITIONING HARNESS ASSEMBLY

B

C

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

2.INSPECT NO. 2 AIR CONDITIONING HARNESS ASSEMBLY
a.

Remove the No. 2 air conditioning harness assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>REAR AIR CONDITIONING UNIT>DISASSEMBLY

E285448C01
5.354,1.5 5.771,1.083 false 0.75,1 0.906,1 0.906,1 0.906,0.646 false 2.344,2.125 2.542,1.615 false 3,2.115 2.677,1.625 false 0.438,0.344 0.75,0.5 0.313,0.156 10 false *a 0.563,0.917 0.875,1.073 0.313,0.156 10 false *b 4.292,0.135 4.604,0.292 0.313,0.156 10 false *c 5.521,2.573 5.833,2.729 0.313,0.156 10 false *d 5.833,0.906 6.146,1.063 0.313,0.156 10 false *e 2.323,2.135 2.635,2.292 0.313,0.156 10 false + 3.01,2.135 3.323,2.292 0.313,0.156 10 false -
*a Component without harness connected
(No. 2 Air Conditioning Harness Assembly)
*b Sensing Portion
*c Resistance (kΩ) *d Temperature (°C (°F))
*e Allowable Range - -



b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (-) - 8 (+) -10°C (14°F) 7.30 to 9.10 kΩ
-5°C (23°F) 5.65 to 6.95 kΩ
0°C (32°F) 4.40 to 5.35 kΩ
5°C (41°F) 3.40 to 4.15 kΩ
10°C (50°F) 2.70 to 3.25 kΩ
15°C (59°F) 2.14 to 2.58 kΩ
20°C (68°F) 1.71 to 2.05 kΩ
25°C (77°F) 1.38 to 1.64 kΩ
30°C (86°F) 1.11 to 1.32 kΩ


NOTICE:
·

Hold the sensor only by its connector. Touching the sensing portion may change the resistance value.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (see the graph).



Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY - AIR CONDITIONING AMPLIFIER ASSEMBLY)

NG

REPLACE NO. 2 AIR CONDITIONING HARNESS ASSEMBLY

3.CHECK HARNESS AND CONNECTOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY - AIR CONDITIONING AMPLIFIER ASSEMBLY)
a.

Disconnect the F81 air conditioning amplifier assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
L20-8 (+) - F81-5 (TEC) Always Below 1 Ω
L20-7 (-) - F81-7 (SGND) Always Below 1 Ω
L20-8 (+) - Body ground Always 10 kΩ or higher
L20-7 (-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR