Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)
RM3160E _58 Vehicle Interior _019714 HEATING / AIR CONDITIONING _0109952 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  B14B3  Lost Communication with Rear Panel LIN  


DESCRIPTION

The No. 2 air conditioning control assembly communicates with the air conditioning amplifier assembly via LIN communication.

If the LIN communication system is malfunctioning, the air conditioning amplifier assembly does not operate even if the No. 2 air conditioning control assembly is operated.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B14B3 Lost Communication with Rear Panel LIN Lost communication with No. 2 air conditioning control assembly
·

Harness or connector between No. 2 air conditioning control assembly and IG power source

·

Harness or connector between No. 2 air conditioning control assembly and body ground

·

LIN communication system

·

No. 2 air conditioning control assembly

·

Air conditioning amplifier assembly


Memorized
(10 sec. or more)*1

*1: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.


WIRING DIAGRAM

E282266E05
1.615,0.875 2.229,1.073 0.615,0.198 10 false RLIN 1.76,1.406 2.375,1.604 0.615,0.198 10 false IG 1.813,1.948 2.427,2.146 0.615,0.198 10 false E 2.021,1.281 2.635,1.479 0.615,0.198 10 false 6 2.01,1.823 2.604,2.094 0.594,0.271 10 false 7 2.833,1.573 3.656,1.906 0.823,0.333 10 false ECU-IG 3.885,1.406 4.854,1.833 0.969,0.427 10 false from IG1 NO. 2 Relay 4.76,2.5 7.104,2.865 2.344,0.365 10 false Air Conditioning Amplifier Assembly 4.771,2.302 5.385,2.5 0.615,0.198 10 false F81 5.25,0.875 5.865,1.073 0.615,0.198 10 false RLIN 2.01,0.729 2.625,0.927 0.615,0.198 10 false 12 4.99,0.698 5.604,0.896 0.615,0.198 10 false 16 0.5,2.542 2.344,2.969 1.844,0.427 10 false No. 2 Air Conditioning Control Assembly 0.51,2.375 1.125,2.573 0.615,0.198 10 false U1 0.938,3.198 2.729,3.479 1.792,0.281 10 false : LIN Communication Line

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following procedure.


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (NO. 2 AIR CONDITIONING CONTROL ASSEMBLY - IG POWER SOURCE)
a.

Disconnect the U1 No. 2 air conditioning control assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
U1-6 (IG) - Body ground Ignition switch off Below 1 V
U1-6 (IG) - Body ground Ignition switch ON 11 to 14 V



Result:
Proceed to
OK
NG



OK

2.CHECK HARNESS AND CONNECTOR (NO. 2 AIR CONDITIONING CONTROL ASSEMBLY - BODY GROUND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.CHECK HARNESS AND CONNECTOR (NO. 2 AIR CONDITIONING CONTROL ASSEMBLY - BODY GROUND)
a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
U1-7 (E) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - NO. 2 AIR CONDITIONING CONTROL ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - NO. 2 AIR CONDITIONING CONTROL ASSEMBLY)
a.

Disconnect the F81 air conditioning amplifier assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
U1-12 (RLIN) - F81-16 (RLIN) Always Below 1 Ω
U1-12 (RLIN) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

4.REPLACE NO. 2 AIR CONDITIONING CONTROL ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.REPLACE NO. 2 AIR CONDITIONING CONTROL ASSEMBLY
a.

Replace the No. 2 air conditioning control assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>REAR AIR CONDITIONING PANEL>REMOVAL

HINT:

Since the No. 2 air conditioning control assembly cannot be inspected while it is removed from the vehicle, replace the No. 2 air conditioning control assembly with a new or known good one and check that the condition returns to normal.


OK:

No. 2 air conditioning control assembly operation returns to normal.



Result:
Result Proceed to
OK A
NG (When troubleshooting according to Problem Symptoms Table) B
NG (When troubleshooting according to the DTC) C



A

END (NO. 2 AIR CONDITIONING CONTROL ASSEMBLY WAS DEFECTIVE)

B

C

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY