82210K
1.REMOVE AIR CONDITIONING HARNESS ASSEMBLY
for LHD:
Disconnect each connector.
Disengage each clamp to remove the air conditioning harness assembly.
for RHD:
Disconnect each connector.
| *A | for Automatic Air Conditioning System | - | - |
Disengage each clamp to remove the air conditioning harness assembly.
88515
2.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.
87050
3.REMOVE AIR CONDITIONING RADIATOR ASSEMBLY
Remove the 6 screws.
Disengage the guide and disconnect the wire harness.
Disengage the 5 claws to remove the air conditioning radiator assembly from the blower assembly with cooler evaporator sub-assembly.
88501
4.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Disengage the clamp.
Remove the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor.
Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
88625
5.REMOVE NO. 1 COOLER THERMISTOR
55835A
6.REMOVE CENTER HEATER TO REGISTER DUCT
Disengage the 4 claws to remove the center heater to register duct.
87201F
7.REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY
Disengage the 2 claws and guide to remove the No. 3 air duct sub-assembly as shown in the illustration.
88897P
8.REMOVE ASPIRATOR (for Manual Air Conditioning System)
Disengage the 2 claws to remove the aspirator.
88897P
9.REMOVE ASPIRATOR (for Automatic Air Conditioning System)
Disengage the clamp.
Disengage the 2 claws to remove the aspirator.
87710G
10.REMOVE QUICK HEATER ASSEMBLY (w/ PTC Heater)
Remove the screw.
Disengage the clamp.
Using a screwdriver, disengage the 2 claws to remove the quick heater bracket.
Remove the 2 screws and quick heater assembly.
87050D
11.REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
Remove the 2 screws and No. 2 air conditioning radiator damper servo sub-assembly.
87107A
12.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
Disengage the 3 claws to remove the heater clamp.
Remove the screw and clamp.
Remove the heater radiator unit sub-assembly.
Prepare a drain pan or cloth in case the coolant leaks.
87050C
13.REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly.