Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT
RM3160E _58 Vehicle Interior _019714 HEATING / AIR CONDITIONING _0109957 BLOWER UNIT A

HEATING / AIR CONDITIONING  BLOWER UNIT  REASSEMBLY  


PROCEDURE

Hide 88539J 1.INSTALL DRAIN COOLER HOSE

a.
E287839
0.583,1.885 0.708,1.646 false 0.76,1.615 0.99,1.385 false 0.5,1.896 0.698,2.073 0.198,0.177 10 true *a 1.01,1.25 1.219,1.438 0.208,0.188 10 true *b
*a Hose Notch
*b Blower Case Assembly Rib


Align the hose notch with the blower case assembly rib as shown in the illustration and install the drain cooler hose.


Hide 87106G 2.INSTALL BLOWER DAMPER SERVO SUB-ASSEMBLY

a.
E287837
0.729,1.542 0.958,0.594 true 0.667,1.552 0.979,1.75 0.313,0.198 10 false *a
*a Link


Connect the link of the blower damper servo sub-assembly to the link of the upper blower case as shown in the illustration.


b.

Install the blower damper servo sub-assembly with the 3 screws.


c.
E287835

Engage the 4 claws to install the upper blower case.


d.

Install the 3 screws.


Hide 87103B 3.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY

a.
E287834

Install the blower motor with fan sub-assembly with the 3 screws.

NOTICE:

Do not install the blower motor with fan sub-assembly if it has been dropped or subjected to a severe impact.



Hide 4.INSTALL AIR REFINER ELEMENT

a.
E287833

Install the air refiner element as shown in the illustration.

NOTICE:

Install the air refiner element with its UP mark oriented in the correct direction.



Hide 88899M 5.INSTALL AIR FILTER COVER PLATE

a.
E287831

Engage the 2 claws to install the air filter cover plate as shown in the illustration.

NOTICE:

Install the air filter cover plate with its UP mark oriented in the correct direction.



Hide 88578B 6.INSTALL NO. 1 COOLING UNIT PACKING

a.

Remove any remaining No. 1 cooling unit packing from the blower assembly.


b.

Remove the release paper from a new No. 1 cooling unit packing.


c.
E287829
1.74,0.635 1.969,0.24 1.969,0.24 2.115,0.24 false 2.135,0.135 2.448,0.333 0.313,0.198 10 false *a
*a Notch


Install the No. 1 cooling unit packing with the notch facing up as shown in the illustration.


Hide 87201 7.INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY

a.
E287828

Engage the 4 claws to install the No. 1 air duct sub-assembly.