1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
51441
2.REMOVE NO. 1 ENGINE UNDER COVER
16361A
3.REMOVE V-RIBBED BELT
88704
4.DISCONNECT SUCTION HOSE SUB-ASSEMBLY
Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.
Remove the O-ring from the suction hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88703
5.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.
Remove the O-ring from the discharge hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88310
6.REMOVE COMPRESSOR ASSEMBLY WITH PULLEY
Disconnect the connector.
Remove the bolt.
|
Bolt |
|
Nut |
Remove the 2 bolts and 2 nuts.
Using an E8 "TORX" socket wrench, remove the 2 stud bolts.
Remove the compressor assembly with pulley.