Be sure to correctly follow the removal and installation procedures for the front seat airbag sub-assembly RH.
73905
1.INSPECT FRONT SEAT AIRBAG SUB-ASSEMBLY RH (for Vehicle not Involved in Collision)
Perform a diagnostic system check.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
Visually check for defects with the front seat airbag sub-assembly RH installed on the vehicle.
The defects are as follows:
Scratches, broken or frayed threads on the surface of the front seat cushion assembly around the front seat airbag sub-assembly RH
Small cracks on the front seat cushion assembly around the front seat airbag sub-assembly RH
Significant discoloration on the front seat cushion assembly around the front seat airbag sub-assembly RH
No defects are found.
If any defects are found, replace the separate type front seat cushion pad or separate type front seat cushion cover with a new one.
73905
2.INSPECT FRONT SEAT AIRBAG SUB-ASSEMBLY RH (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
Visually check for defects with the front seat airbag sub-assembly RH removed from the vehicle.
The defects are as follows:
Cuts
Small cracks
Significant discoloration
Marks from being dropped
Cracks or other damage to the wire harness or connector
Deformation of the installation surface of the front seat airbag sub-assembly RH
No defects are found.
If any defects are found, replace the front seat airbag sub-assembly RH with a new one.