Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0110870 DYNAMIC RADAR CRUISE CONTROL SYSTEM U

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  TERMINALS OF ECU  


CHECK DRIVING SUPPORT ECU ASSEMBLY


E158948
3.5,0.208 3.958,0.49 0.458,0.281 3.604,0.26 3.938,0.479 0.333,0.219 10 false F84

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F84-30 (B) - F84-25 (GND) R - W-B Battery Always 11 to 14 V
F84-39 (CA2H) - F84-25 (GND) G - W-B CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 1)
F84-17 (CA2L) - F84-25 (GND) W - W-B CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 2)
F84-25 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
F84-6 (SPSW) - F84-25 (GND) V - W-B Vehicle-to-vehicle distance control switch signal Engine switch on (IG), Vehicle-to-vehicle distance control switch on Below 1 V
F84-6 (SPSW) - F84-25 (GND) V - W-B Vehicle-to-vehicle distance control switch signal Engine switch on (IG), Vehicle-to-vehicle distance control switch off 10 to 14 V
F84-18 (CA1N) - F84-25 (GND) W - W-B CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 3)
F84-40 (CA1P) - F84-25 (GND) R - W-B CAN communication signal Engine switch on (IG) Pulse generation
(See waveform 4)
F84-32 (WIP2) - F84-25 (GND) P - W-B Wiper switch signal Engine switch on (IG), wiper switch HI position 11 to 14 V
F84-32 (WIP2) - F84-25 (GND) P - W-B Wiper switch signal Engine switch on (IG), wiper switch LO position 6 to 10 V

a.

Waveform 1

i.
E228691
2.989,1.44 3.316,1.615 0.327,0.175 10 GND

CAN communication signal

Item Content
Terminal Name F84-39 (CA2H) - F84-25 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.




b.
E228688
2.99,1.442 3.317,1.617 0.327,0.175 10 GND

Waveform 2

i.

CAN communication signal

Item Content
Terminal Name F84-17 (CA2L) - F84-25 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.




c.

Waveform 3

i.
E228688
2.99,1.442 3.317,1.617 0.327,0.175 10 GND

CAN communication signal

Item Content
Terminal Name F84-18 (CA1N) - F84-25 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.




d.
E228691
2.989,1.44 3.316,1.615 0.327,0.175 10 GND

Waveform 4

i.

CAN communication signal

Item Content
Terminal Name F84-40 (CA1P) - F84-25 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.





CHECK ECM


A247842
2.396,0.365 2.802,0.688 0.406,0.323 5.813,0.365 6.219,0.688 0.406,0.323 2.51,0.438 2.781,0.594 0.271,0.156 10 false C1 5.896,0.438 6.198,0.594 0.302,0.156 10 false A43

Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
A43-45 (TC) - C1-49 (E1) G - BR Connected to terminal TC of DLC3 Engine switch on (IG) 11 to 14 V
A43-45 (TC) - C1-49 (E1) G - BR Connected to terminal TC of DLC3 Terminals TC and CG of DLC3 connected Below 1 V
A43-51 (STP) - C1-49 (E1) G - BR Stop light signal Engine switch on (IG), Brake pedal depressed 11 to 14 V
A43-51 (STP) - C1-49 (E1) G - BR Stop light signal Engine switch on (IG), Brake pedal released Below 1 V
A43-47 (CCS) - C1-49 (E1) R - BR Cruise control main switch circuit Cruise control main switch OFF 1 MΩ or higher
A43-47 (CCS) - C1-49 (E1) R - BR Cruise control main switch circuit Cruise control main switch ON Below 1.5 Ω
A43-47 (CCS) - C1-49 (E1) R - BR Cruise control main switch circuit +/RES switch ON 235 to 245 Ω
A43-47 (CCS) - C1-49 (E1) R - BR Cruise control main switch circuit -/SET switch ON 617 to 643 Ω
A43-47 (CCS) - C1-49 (E1) R - BR cruise control main switch circuit CANCEL switch ON 1509 to 1571 Ω
A43-36 (ST1-) - C1-49 (E1) L - BR Stop light signal Engine switch on (IG), Brake pedal depressed Below 1 V
A43-36 (ST1-) - C1-49 (E1) L - BR Stop light signal Engine switch on (IG),
Brake pedal released
11 to 14 V
C1-69 (D) - C1-49 (E1) G - BR D shift position signal Engine switch on (IG),
Shift lever in D or S range
11 to 14 V
C1-69 (D) - C1-49 (E1) G - BR D shift position signal Engine switch on (IG),
Shift lever in other than D or S range
Below 1 V
A43-50 (SFTD) - C1-49 (E1) SB - BR Down shift switch signal Engine switch on (IG) and shift lever in S range 11 to 14 V
Engine switch on (IG) and shift lever in "-" position (Down shift) Below 1 V
A43-34 (SFTU) - C1-49 (E1) V - BR Up shift switch signal Engine switch on (IG) and shift lever in S range 11 to 14 V
Engine switch on (IG) and shift lever in "+" position (Up shift) Below 1 V
A43-48 (CCHG) - C1-49 (E1) Y - BR Cruise control main switch signal Engine switch on (IG)
MODE switch off
10 to 14 V
A43-48 (CCHG) - C1-49 (E1) Y - BR Cruise control main switch signal Engine switch on (IG)
MODE switch on
Below 1 V

If the value is not within the specified range, the ECM may have a malfunction.