Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0110870 DYNAMIC RADAR CRUISE CONTROL SYSTEM D

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  OPERATION CHECK  


INPUT SIGNAL CHECK


a.
A305789
2.656,1.198 2.969,1.354 0.313,0.156 10 false *a 1.365,1.656 1.677,1.813 0.313,0.156 10 false *b 1.333,0.333 1.646,0.49 0.313,0.156 10 false *c 0.75,1.104 1.063,1.26 0.313,0.156 10 false *d 2.146,0.302 2.458,0.458 0.313,0.156 10 false *e
*a ON/OFF
*b -/SET
*c +/RES
*d CANCEL
*e MODE


Connect the GTS to the DLC3.


b.

Check the cruise control main switch using the Data List function of the GTS (ON-OFF, -/SET, +/RES, CANCEL and MODE).



INSPECT MODE SWITCH


a.
E248784
3.08,1.534 3.241,1.694 0.161,0.161 10 *a 2.708,0.336 2.868,0.497 0.161,0.161 10 *b
*a ON/OFF
*b MODE


Turn the engine switch on (IG).


b.

Turn the dynamic radar cruise control system on using the cruise control main switch (ON-OFF button). Then push the cruise control main switch to MODE and hold in that position for 1 second or more to change to constant speed control mode.


c.
A305790
1.25,0.073 1.563,0.229 0.313,0.156 10 false *a 1.219,1.458 1.531,1.615 0.313,0.156 10 false *b
*a Cruise Control Indicator (Vehicle-to-vehicle distance control mode)
*b Cruise Control Indicator (Constant speed control mode)


Check that the cruise control indicator (vehicle-to-vehicle distance control mode) goes off and the cruise control indicator (constant speed control mode) illuminates.

NOTICE:

Do not push any other switches before pushing the cruise control main switch to MODE. If another switch is pushed, turn the dynamic radar cruise control system off and repeat the procedure.


HINT:

If a malfunction is detected, turn the engine switch off and repeat the procedure.




INSPECT STEERING PAD SWITCH ASSEMBLY


a.

Turn the engine switch on (IG).


b.

Turn the dynamic radar cruise control system on using the cruise control main switch (ON-OFF button).


c.

Press the vehicle-to-vehicle distance control switch of the steering pad switch.

E287457
5.281,1.573 5.417,1.969 5.417,1.969 5.771,1.969 true 5.813,1.906 6.063,2.146 0.25,0.24 10 false *1
*1 Vehicle-to-vehicle Distance Control Switch - -



d.

Check that the indication of the vehicle-to-vehicle distance, which is shown on the combination meter assembly (multi-information display), changes from long to middle to short in that order.

E287458
0.563,0.292 0.813,0.531 0.25,0.24 10 false *1 2.688,0.292 2.917,0.531 0.229,0.24 10 false *2 4.823,0.281 5.052,0.49 0.229,0.208 10 false *3
*1 Long *2 Middle
*3 Short - -


HINT:

Long is automatically selected each time the engine is started.