Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0110870 DYNAMIC RADAR CRUISE CONTROL SYSTEM C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  P1578  Brake System Malfunction  


DESCRIPTION

This DTC is stored when the VSC system has a problem. Check the VSC system when this DTC is output.

DTC No. Detection Item DTC Detection Condition Trouble Area
P1578 Brake System Malfunction The ECM receives a brake system error signal for approximately 0.2 seconds or more while the dynamic radar cruise control is operating.
·

VSC system

·

ECM



HINT:

This circuit uses CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more CAN communication system DTCs are stored.


WIRING DIAGRAM

E149011
0.854,2.469 2.635,2.719 1.781,0.25 10 false : CAN Communication Line 0.917,1.844 3.854,2.188 2.938,0.344 10 false Skid Control ECU (Brake Actuator Assembly) 0.927,1.635 1.229,1.823 0.302,0.188 10 false A47 5.104,1.635 5.427,1.813 0.323,0.177 10 false A43 4.938,0.583 5.375,0.813 0.438,0.229 10 false CANH 4.948,1.073 5.385,1.302 0.438,0.229 10 false CANL 2.125,0.563 2.563,0.792 0.438,0.229 10 false CANH 2.125,1.073 2.563,1.302 0.438,0.229 10 false CANL 2.594,0.396 2.802,0.594 0.208,0.198 10 false 25 4.677,0.396 4.885,0.594 0.208,0.198 10 false 13 4.677,0.906 4.885,1.094 0.208,0.188 10 false 26 2.594,0.906 2.802,1.083 0.208,0.177 10 false 14 5.094,1.823 5.563,2.083 0.469,0.26 10 false ECM

PROCEDURE

1.CHECK FOR DTCS (ABS/VSC/TRC)
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.


e.

Check for DTCs.

Chassis > ABS/VSC/TRC > Trouble Codes
50001 105

Result:
Result Proceed to
DTCs are not output A
DTCs are output B


f.

Turn the engine switch off.



A

B