Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › 2013.12–2016.11
RM3160E _58 Vehicle Interior _019711 PRE-CRASH SAFETY _0110871 PRE-CRASH SAFETY SYSTEM L

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL


NOTICE:

When disconnecting the battery negative (-) cable, initialize the following system(s) after the cable is reconnected:

System See Procedure
Parking Assist Monitor System (Click here)
Power Door Lock Control System
Air Conditioning System (for Automatic Air Conditioning System)
Air Conditioning System (for Manual Air Conditioning System)
Power Back Door System



TROUBLESHOOTING PRECAUTIONS


a.

If a terminal contact point malfunction or part installation problem occurs, removal and reinstallation of the suspected part may return the system to normal. However, be aware that the normal condition may only be temporary.


b.

Before disconnecting connectors or removing/installing parts, determine the malfunctioning area by checking and writing down the vehicle condition at the time the malfunction occurred (DTC outputs etc.).


c.

Be sure to check for DTCs related to other systems. The pre-crash safety system may be influenced by malfunctions in other systems.



HANDLING PRECAUTIONS


a.

When removing and installing ECUs, sensors, switches or other pre-crash safety system related parts, perform the following:

·

Make sure that the engine switch is off unless otherwise specified in the inspection procedure.

·

After removal/installation, check for DTCs and confirm that a normal system code is output.