Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 2GR-FE) › 2013.12–2016.11
RM3160E _58 Vehicle Interior _019714 HEATING / AIR CONDITIONING _0109964 COMPRESSOR(for 2GR-FE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 2GR-FE)  DISASSEMBLY  


PROCEDURE

Hide 88688K 1.REMOVE COOLER COMPRESSOR BRACKET

a.
E273173

Disengage the clamp.


b.

Remove the screw and cooler compressor bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

a.
E272915
2.844,1.979 1.646,1.979 false 2.906,1.896 3.292,2.115 0.385,0.219 10 false SST

Secure the compressor and magnetic clutch in a vise between aluminum plates.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers that are used for adjusting clutch clearance.



d.
E272916

Using a snap ring expander, remove the snap ring and magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disconnect the connector.


f.
E272917

Using a snap ring expander, remove the snap ring and magnet clutch stator.