Home › Drivetrain › U660F AUTOMATIC TRANSMISSION / TRANSAXLE › DIFFERENTIAL CASE › 2014.08–2016.11
RM3160E _52 Drivetrain _019726 U660F AUTOMATIC TRANSMISSION / TRANSAXLE _0107351 DIFFERENTIAL CASE A

U660F AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 43410M 1.REMOVE FRONT DRIVE SHAFT OIL SEAL RH

a.

for Outside:

i.
C196817N02
0.708,0.365 0.781,0.365 false 2.188,0.948 2.354,0.948 false 0.375,0.26 0.688,0.427 0.313,0.167 10 false SST 2.375,0.865 2.688,1.031 0.313,0.167 10 false SST

Using SST, remove the front drive shaft oil seal RH from the transaxle housing.

SST
09308-00010  



b.
C196917N04
0.833,1.292 0.958,1.292 false 2.49,0.417 2.604,0.417 2.604,0.417 2.677,0.646 false 0.469,1.208 0.781,1.375 0.313,0.167 10 false SST 2.208,0.333 2.521,0.5 0.313,0.167 10 false SST

for Inside:

i.

Using SST, remove the front drive shaft oil seal RH from the front differential case.

SST
09308-00010  



Hide 43420H 2.REMOVE FRONT DRIVE SHAFT OIL SEAL LH

a.
C196822N02
0.719,0.479 0.865,0.479 false 1.906,0.875 2.063,0.875 false 0.354,0.396 0.677,0.563 0.323,0.167 10 false SST 1.573,0.792 1.896,0.958 0.323,0.167 10 false SST

Using SST, remove the front drive shaft oil seal LH from the transaxle case sub-assembly.

SST
09308-00010  


Hide 4.INSPECT FRONT DIFFERENTIAL SIDE GEAR THRUST AMOUNT

Hide 41221 5.REMOVE FRONT DIFFERENTIAL RING GEAR

a.
C313113C02
1.177,1.583 0.479,1.104 0.479,1.104 1.25,1.521 true 0.26,1 0.573,1.156 0.313,0.156 10 false *a
*a Matchmark


Put matchmarks on the front differential ring gear and front differential case.


b.
C306083

Remove the 12 bolts from the front differential ring gear.


c.
C313112

Using a plastic hammer, tap on the front differential ring gear to remove it from the front differential case.


Hide 41342A 6.REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

a.

Secure the front differential case in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.
C309137

Using a 5 mm pin punch and a hammer, remove the front differential pinion shaft straight pin from the front differential case.


Hide 41342F 7.REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT

a.
C309138

Remove the front No. 1 differential pinion shaft from the front differential case.


Hide 8.INSPECT FRONT DIFFERENTIAL PINION BACKLASH

Hide 9.REMOVE FRONT DIFFERENTIAL SIDE GEAR

a.

Install SST as shown in the illustration and tighten it.

C312293C01
4.844,0.167 5.156,0.167 false 4.469,1.24 4.969,1.24 4.969,1.24 5.125,1.146 false 4.979,1.25 5.125,1.385 false 3.135,0.188 3.448,0.344 0.313,0.156 10 false *a 1.115,2.281 1.427,2.438 0.313,0.156 10 false *b 4.552,0.083 4.865,0.24 0.313,0.156 10 false SST 4.188,1.156 4.5,1.313 0.313,0.156 10 false SST
*a Turn *b Hold


SST
09528-52010  (09528-05010, 09953-05010)

NOTICE:

Do not overtighten SST, as doing so will damage the front differential side gears, conical springs, front No. 1 differential side gear thrust washers and front differential case.


HINT:
·

Tighten SST until there is clearance between the front differential pinions and front differential side gears.

·

When removing the front differential pinions, do not overtighten SST, as it is necessary to rotate the front differential side gears.




b.
C309139C01
2.708,2.896 2.51,2.896 2.51,2.896 2.51,2.292 false 1.708,0.854 2.021,1.01 0.313,0.156 10 false *a 2.781,2.823 3.094,2.979 0.313,0.156 10 false SST
*a Turn


Install SST as shown in the illustration, rotate the front differential side gear, and then remove the 2 front differential pinions and 2 front differential pinion thrust washers from the front differential case.

SST
09528-52010  (09528-05030)

NOTICE:

Do not drop the front differential pinion and front differential pinion thrust washer.



c.
C309140C01
2.208,0.177 2.427,0.177 false 2.208,0.719 2.365,0.719 false 2.219,0.323 2.448,0.323 false 2.177,1.26 2.333,1.26 false 2.24,1.708 2.448,1.708 false 2.229,1.865 2.438,1.865 false 2.031,1.177 2.344,1.333 0.313,0.156 10 false *1 2.052,1.625 2.365,1.781 0.313,0.156 10 false *2 2.052,1.792 2.365,1.948 0.313,0.156 10 false *3 2.021,0.635 2.333,0.792 0.313,0.156 10 false *1 2.01,0.26 2.323,0.417 0.313,0.156 10 false *2 2.01,0.083 2.323,0.24 0.313,0.156 10 false *3
*1 Front Differential Side Gear
*2 Conical Spring
*3 Front No. 1 Differential Side Gear Thrust Washer


Remove SST from the front differential case, and then remove the 2 front differential side gears, 2 front No. 1 differential side gear thrust washers and 2 conical springs from the front differential case.

NOTICE:

Do not drop the front differential side gear, front No. 1 differential side gear thrust washer or conical spring.



Hide 41311E 10.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

a.
C309437C01
1.042,1.188 1.552,1.042 false 1.313,0.823 1.563,1.042 1.563,1.042 1.365,1.365 false 2.052,0.188 2.365,0.344 0.313,0.156 10 false *a 0.031,0.313 0.344,0.469 0.313,0.156 10 false *b 1.615,0.948 1.927,1.104 0.313,0.156 10 false SST
*a Turn
*b Hold


Using SST, remove the front differential case front tapered roller bearing (inner race) from the front differential case.

SST
09950-00020  
09950-00030  
09950-40011  (09957-04010)
09950-60010  (09951-00480)


b.
C196812N02
0.762,0.395 1.091,0.568 0.329,0.173 10 SST 1.135,0.481 1.407,0.481 false 1.577,1.015 1.884,1.179 0.307,0.164 10 SST 1.942,1.098 2.413,1.098 false

Using SST, remove the front differential case front tapered roller bearing (outer race) and shim from the transaxle housing.

SST
09308-00010  


Hide 41311F 11.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

a.
C306372C01
1.031,1.063 1.385,1.063 1.385,1.063 1.063,1.396 false 0.729,1.177 1.365,1.073 false 0.781,1.365 1.375,1.073 false 2.75,0.677 3,0.563 3,0.563 2.865,0.781 false 1.979,1.302 1.979,0.854 1.979,0.854 2.146,0.854 false 1.979,1.021 2.135,1.021 false 1.448,0.99 1.906,1.188 0.458,0.198 10 false SST 3.031,0.479 3.344,0.656 0.313,0.177 10 false SST 1.875,1.333 2.188,1.51 0.313,0.177 10 true SST 1.396,0.25 1.708,0.448 0.313,0.198 10 false *a 0.073,0.552 0.385,0.75 0.313,0.198 10 false *b
*a Turn
*b Hold


Using SST, remove the front differential case rear tapered roller bearing (inner race) from the front differential case.

SST
09950-00020  
09950-00030  
09950-40011  (09957-04010)
09950-60010  (09951-00480)


b.
C138536N05
1.49,0.635 1.979,0.635 false 2.042,0.563 2.604,0.802 0.563,0.24 10 false SST

Using SST, remove the front differential case rear tapered roller bearing (outer race) from the transaxle case sub-assembly.

SST
09308-00010