Home › Engine / Hybrid System › 2GR-FE ENGINE MECHANICAL › CYLINDER HEAD › 2014.08–2016.11
RM3160E _51 Engine / Hybrid System _019663 2GR-FE ENGINE MECHANICAL _0109584 CYLINDER HEAD A

2GR-FE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13716 1.REMOVE VALVE STEM CAP

a.

Remove the valve stem caps from the cylinder head sub-assembly.

HINT:

Arrange the removed parts in the correct order.



Hide 13711 2.REMOVE INTAKE VALVE

a.
A333217N01
1.438,0.542 1.615,0.271 1.615,0.271 1.74,0.271 false 1.802,0.198 2.26,0.396 0.458,0.198 10 false SST

Using SST, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  09202-00020  


b.

Remove the valve spring retainer, inner compression spring and intake valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 3.REMOVE EXHAUST VALVE

a.
A333218N01
1.906,0.344 2.052,0.344 2.052,0.344 2.198,0.656 false 1.646,0.271 2.104,0.469 0.458,0.198 10 false SST

Using SST, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  09202-00020  


b.

Remove the valve spring retainer, inner compression spring and exhaust valve.

HINT:

Arrange the removed parts in the correct order.



Hide 4.REMOVE VALVE STEM OIL SEAL

a.
A120701

Using needle-nose pliers, remove the valve stem oil seal.


Hide 13734 5.REMOVE VALVE SPRING SEAT

a.
A120702

Using compressed air and a magnet hand, remove the valve spring seats by blowing air onto them.


Hide 11117E 6.REMOVE NO. 1 STRAIGHT SCREW PLUG

a.
A129718C06
0.083,0.073 0.458,0.438 0.375,0.365 12 false *A 0.125,2.396 0.615,2.781 0.49,0.385 12 false *B
*A for Bank 1
*B for Bank 2


Using a 10 mm hexagon wrench, remove the 4 No. 1 straight screw plugs and 4 gaskets.

NOTICE:

If coolant leaks from a No. 1 straight screw plug or the plug is corroded, replace it.



Hide 11117F 7.REMOVE NO. 2 STRAIGHT SCREW PLUG

a.
A187883C06
0.083,0.052 0.458,0.417 0.375,0.365 12 false *A 0.083,2.292 0.438,2.625 0.354,0.333 12 false *B
*A for Bank 1
*B for Bank 2


Using a 14 mm hexagon wrench, remove the 2 No. 2 straight screw plugs and 2 gaskets.

NOTICE:

If coolant leaks from a No. 2 straight screw plug or the plug is corroded, replace it.