Home › Engine / Hybrid System › 1AR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR › from 2015.11
RM3160E _51 Engine / Hybrid System _019671 1AR-FE ENGINE CONTROL _0106854 CAMSHAFT POSITION SENSOR A

1AR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11102A 1.INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)

a.

Apply a light coat of engine oil to the O-ring of the camshaft position sensor.


b.

Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft position sensor has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.




c.

Connect the camshaft position sensor connector.


Hide 11102A 2.INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)

a.

Apply a light coat of engine oil to the O-ring of the camshaft position sensor.


b.

Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft position sensor has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.




c.

Connect the camshaft position sensor connector.


Hide 12601B 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY