Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Front Side) › from 2016.11
RM3160E _59 Vehicle Exterior _019721 WIPER / WASHER _0101302 WASHER NOZZLE(for Front Side) A

WIPER / WASHER  WASHER NOZZLE(for Front Side)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 53341B 1.REMOVE HOOD INSULATOR (w/ Heater)

Hide 85035 2.REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/o Heater)

a.
E288260C01
0.406,2.281 0.885,1.813 true 0.281,2.292 0.531,2.552 0.25,0.26 10 true *a 2.125,1.125 2.333,1.396 0.208,0.271 10 false 1 2.813,0.802 3.021,1.073 0.208,0.271 10 false 2
*a Protective Tape


Using a screwdriver, disengage the 2 claws as indicated by the arrows, in the order shown in the illustration to separate the washer nozzle sub-assembly.

NOTICE:

Be careful not to damage the windshield glass.


HINT:
·

Tape the screwdriver tip before use.




b.
E288261

Remove the washer nozzle sub-assembly from the washer hose.

NOTICE:

Washer nozzle sub-assemblies cannot be reused.



Hide 85035 3.REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/ Heater)

a.
E354278C01
0,0 0,0 false
V100135

Connector
V100136

Washer Hose


Disconnect the connector.


b.

Disconnect the washer hose.


c.
E354279

Tie a string to the wire harness of the washer nozzle sub-assembly.


d.
E354281N01
1.229,1.188 1.385,1.385 0.156,0.198 10 false 1 0.594,0.938 0.75,1.135 0.156,0.198 10 false 2

Using a moulding remover, disengage the 2 claws as indicated by the arrows, in the order shown in the illustration to separate the washer nozzle sub-assembly.

NOTICE:

Be careful not to damage the windshield glass.



e.
E354282

Pull the washer nozzle sub-assembly as shown in the illustration from the hood sub-assembly to remove it.

NOTICE:
·

Washer nozzle sub-assemblies cannot be reused.

·

Leave the string inside the hood sub-assembly.




f.

Remove the string from the wire harness of the washer nozzle sub-assembly.