Home › Engine / Hybrid System › 2GR-FKS LUBRICATION › OIL PUMP › from 2016.11
RM3160E _51 Engine / Hybrid System _060162 2GR-FKS LUBRICATION _0295476 OIL PUMP G

2GR-FKS LUBRICATION  OIL PUMP  INSPECTION  


PROCEDURE

Hide 1.INSPECT OIL PUMP RELIEF VALVE

a.
A369469

Coat the oil pump relief valve with engine oil and check that it falls smoothly into the valve hole by its own weight.

HINT:

If the oil pump relief valve does not fall smoothly, replace the timing chain cover assembly.



Hide 2.INSPECT OIL PUMP ROTOR SET

a.

Apply engine oil to the drive rotor and driven rotor.


b.
A369468C01
0.917,0.177 1.521,0.177 true 1.052,0.177 1.052,1.156 1.052,1.156 1.354,1.156 true 0.729,0.094 1.042,0.25 0.313,0.156 10 false *a
*a Rotor Mark


Install the drive rotor and driven rotor to the timing chain cover assembly with the rotor marks facing up. Check that the rotors rotate smoothly.

HINT:

If the rotors do not rotate smoothly, replace the timing chain cover assembly.



c.
A369471C01
1.125,0.302 1.677,0.813 true 0.979,0.156 1.292,0.313 0.313,0.156 10 false *a
*a Feeler Gauge


Check the tip clearance.

i.

Using a feeler gauge, measure the clearance between the drive rotor and driven rotor tips as shown in the illustration.

Standard Tip Clearance:

0.040 to 0.150 mm (0.00157 to 0.00591 in.)


Maximum Tip Clearance:

0.150 mm (0.00591 in.)


HINT:

If the tip clearance is more than the maximum, replace the timing chain cover assembly.




d.
A369472C02
1.927,1.063 2.24,0.417 2.24,0.417 2.406,0.417 true 1.406,0.979 1.208,0.49 1.208,0.49 1.031,0.49 true 0.802,0.417 1.021,0.583 0.219,0.167 10 true *a 2.458,0.333 2.677,0.5 0.219,0.167 10 true *b
*a Precision Straightedge
*b Feeler Gauge


Check the side clearance.

i.

Using a feeler gauge and precision straightedge, measure the clearance between the drive rotor and driven rotor and precision straightedge as shown in the illustration.

Standard Side Clearance:

0.030 to 0.070 mm (0.00118 to 0.00276 in.)


Maximum Side Clearance:

0.070 mm (0.00276 in.)


HINT:

If the side clearance is more than the maximum, replace the timing chain cover assembly.




e.
A369473C02
1.24,0.354 1.375,0.354 1.375,0.354 1.656,0.792 true 1.073,0.271 1.385,0.427 0.313,0.156 10 false *a
*a Feeler Gauge


Check the body clearance.

i.

Using a feeler gauge, measure the clearance between the timing chain cover assembly and driven rotor as shown in the illustration.

Standard Body Clearance:

0.250 to 0.325 mm (0.00984 to 0.0128 in.)


Maximum Body Clearance:

0.325 mm (0.0128 in.)


HINT:

If the body clearance is more than the maximum, replace the timing chain cover assembly.