Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT DRIVE SHAFT ASSEMBLY(for 2GR-FKS) › from 2016.11
RM3160E _52 Drivetrain _019686 DRIVE SHAFT / PROPELLER SHAFT _0295731 FRONT DRIVE SHAFT ASSEMBLY(for 2GR-FKS) G

DRIVE SHAFT / PROPELLER SHAFT  FRONT DRIVE SHAFT ASSEMBLY(for 2GR-FKS)  INSPECTION  


PROCEDURE

Hide 1.INSPECT FRONT DRIVE SHAFT ASSEMBLY

a.
C091598

Check that there is no excessive play in the radial direction of the outboard joint.


b.

Check that the inboard joint slides smoothly in the thrust direction.


c.

Check that there is no excessive play in the radial direction of the inboard joint.


d.

Check the boots for damage.


e.
C157783N28
1.563,1.688 1.792,1.865 0.229,0.177 10 false A

Check whether each drive shaft dimension (A) is within specification.

NOTICE:

Keep the drive shaft assembly level during inspection.


Dimension (A) (for 2WD):
for LH Side 604.75 mm (1.98 ft.)
for RH Side 925.55 mm (3.04 ft.)


Dimension (A) (for AWD):
for LH Side 604.75 mm (1.98 ft.)
for RH Side 926.55 mm (3.04 ft.)