Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM › from 2016.11
RM3160E _56 Audio / Visual / Telematics _060168 TELEMATICS _0296504 TELEMATICS SYSTEM U

TELEMATICS  TELEMATICS SYSTEM  TERMINALS OF ECU  


HINT:

Check from the rear of the connector while it is connected to the components.


TELEMATICS TRANSCEIVER


E342820C35
4.594,0.25 5.01,0.5 0.417,0.25 2.5,0.25 2.917,0.5 0.417,0.25 1.25,0.25 1.667,0.5 0.417,0.25 2.594,0.302 3.208,0.5 0.615,0.198 10 false L31 1.354,0.302 1.969,0.5 0.615,0.198 10 false L32 4.656,0.302 5.271,0.5 0.615,0.198 10 false F140 1.708,0.281 2.021,0.438 0.313,0.156 10 false *a 2.969,0.292 3.281,0.448 0.313,0.156 10 false *b
*a Connector Color: Gray (to GNSS Antenna) *b Connector Color: Blue (to Telephone Antenna)


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*1: for 6 Speakers

*2: for 12 Speakers

F140-1 (+B) - F140-4 (E) W - W-B Power source (+B) Always 11 to 14 V
F140-2 (SPI+) - F140-4 (E) LG - W-B Sound signal Audio system playing A waveform synchronized with sound signals is output
F140-3 (SPI-) - F140-4 (E) L - W-B Sound signal Audio system playing A waveform synchronized with sound signals is output
F140-4 (E) - Body ground W-B - Body ground Ground Always Below 1 V
F140-5 (SPO+) - F140-4 (E) W - W-B Sound signal Audio system playing, or emergency call mode A waveform synchronized with sound signals is output
F140-6 (SPO-) - F140-4 (E) B - W-B Sound signal Audio system playing, or emergency call mode A waveform synchronized with sound signals is output
F140-7 (IG2) - F140-4 (E) R - W-B Power source (IG) Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V
F140-8 (ACC) - F140-4 (E) GR - W-B Power source (ACC) Engine switch on (ACC) 11 to 14 V
Engine switch off Below 1 V
F140-9 (SLED) - F140-4 (E) R - W-B Manual (SOS) switch illumination power supply Engine switch on (ACC) 11 to 14 V
Engine switch off Below 1 V
F140-10 (SPDP) - F140-4 (E) BE - W-B Vehicle speed signal See "Vehicle Signal Check Mode" in Operation Check
(Click here)
-
F140-11 (IND1) - F140-4 (E) G - W-B Manual (SOS) switch indicator (red) illumination signal For 10 seconds after engine switch turned on (IG) 1 to 8.5 V
Engine switch off Below 1 V
F140-12 (IND2) - F140-4 (E) L - W-B Manual (SOS) switch indicator (green) illumination signal For 2 seconds after engine switch turned on (IG) 1 to 8.5 V
Engine switch off Below 1 V
F140-15 (CANP) B CAN communication signal - -
F140-16 (CANN) W CAN communication signal - -
F140-17 (MUTE) - F140-4 (E) Y*1, LG*2 - W-B Mute signal Audio system playing 5.0 V or less
Emergency call mode Below 1 V
F140-18 (MCO+) - F140-4 (E) L - W-B Sent microphone voice signal See "Microphone Check" in Operation Check
(Click here)
-
F140-19 (MCO-) - F140-4 (E) P - W-B Sent microphone voice signal See "Microphone Check" in Operation Check
(Click here)
-
F140-23 (ILL+) - F140-4 (E) G - W-B Illumination signal Light control switch off Below 1 V
Light control switch in tail or head position 6.8 V or higher
F140-24 (GSW) - F140-4 (E) B - W-B Collision detection signal Engine switch on (IG) Pulse generation
(Refer to waveform 1)
F140-26 (SIG-) - F140-4 (E) BE - W-B Ground Always Below 1 Ω
F140-27 (SIG1) - F140-4 (E) B - W-B Manual (SOS) switch condition signal Manual (SOS) switch not pressed 2.0 to 2.3 V
Manual (SOS) switch pressed Below 1 V
F140-32 (SGND) - F140-4 (E) Shield - W-B Shield ground Always Below 1 Ω
F140-33 (MCVD) - F140-4 (E) G - W-B Microphone power supply Engine switch off Below 1 V
Engine switch on (ACC) 4 to 6 V
F140-34 (MCI+) - F140-4 (E) L - W-B Receive microphone voice signal See "Microphone Check" in Operation Check
(Click here)
-
F140-35 (MCI-) - F140-4 (E) P - W-B Receive microphone voice signal See "Microphone Check" in Operation Check
(Click here)
-

a.
E165239N08
0.156,2.313 0.552,2.542 0.396,0.229 10 false GND

Oscilloscope waveform:

i.

Waveform 1

Item Condition
Tester connection F140-24 (GSW) - F140-4 (E)
Tool setting 5.0 V/DIV., 20 ms/DIV.
Vehicle condition Engine switch on (IG)