Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM › from 2016.11
RM3160E _56 Audio / Visual / Telematics _060168 TELEMATICS _0296504 TELEMATICS SYSTEM C

TELEMATICS  TELEMATICS SYSTEM  B15F0  VIN Not Programmed or Mismatch - DCM  


DESCRIPTION

This DTC is stored when the Vehicle Identification Number (VIN) is not stored in the telematics transceiver or when the VIN stored in the telematics transceiver and the VIN stored in the ECM do not match.

DTC No. Detection Item DTC Detection Condition Trouble Area
B15F0 VIN Not Programmed or Mismatch - DCM When either of the following conditions is met:
·

The VIN is not stored in the telematics transceiver.

·

The VIN stored in the telematics transceiver and the VIN stored in the ECM do not match.


·

SFI system

·

CAN communication system



PROCEDURE

1.REGISTER VIN
a.

Turn the engine switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the engine switch on (IG) and wait for 20 seconds.


d.

Turn the GTS on.


e.

Enter the following menus: Body Electrical / Telematics / Utility / Vin Synchronization

Body Electrical > Telematics > Utility
Tester Display
VIN Synchronization
50005 233 2391

f.

According to the display on the GTS, perform VIN Synchronization to register the VIN to the telematics transceiver.


Result:
Proceed to
NEXT



NEXT

2.CHECK DTC
2.CHECK DTC
a.

Turn the engine switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the engine switch on (IG) and wait for 20 seconds.


d.

Turn the GTS on.


e.

Check for DTCs and check that no DTCs are output.

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM>DTC CHECK / CLEAR

Body Electrical > Telematics > Trouble Codes
50001 233
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

END

NG

3.CHECK CAN COMMUNICATION SYSTEM
3.CHECK CAN COMMUNICATION SYSTEM
a.

Check if CAN communication system DTCs are output.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

OK:

CAN communication system DTCs are not output.



Result:
Proceed to
OK
NG



OK

NG