Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Radio and Display Type) › from 2016.11
RM3160E _56 Audio / Visual / Telematics _019701 NAVIGATION / MULTI INFO DISPLAY _0101135 NAVIGATION SYSTEM(for Radio and Display Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type)  Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the radio and display receiver assembly via this circuit.

The sound signal that has been sent is amplified by the radio and display receiver assembly and then is sent to the speakers.

If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunction in the radio and display receiver assembly or speakers.

WIRING DIAGRAM

E351362E12
3.271,2.813 4.115,3.125 0.844,0.313 10 false (Shielded) 0.844,0.615 1.365,0.896 0.521,0.281 10 false AUXO 0.917,1.229 1.438,1.51 0.521,0.281 10 false ARO 0.833,2.417 1.354,2.698 0.521,0.281 10 false ASGN 0.833,2.99 1.354,3.271 0.521,0.281 10 false AGND 0.448,3.458 0.969,3.74 0.521,0.281 10 false F125 0.448,3.625 1.635,4.083 1.188,0.458 10 false No. 1 Stereo Jack Adapter Assembly 1.313,0.531 1.833,0.813 0.521,0.281 10 false 9 1.313,1.115 1.833,1.396 0.521,0.281 10 false 6 1.313,1.708 1.833,1.99 0.521,0.281 10 false 7 1.313,2.292 1.833,2.573 0.521,0.281 10 false 8 1.333,2.896 1.854,3.177 0.521,0.281 10 false 10 5.688,0.531 6.208,0.813 0.521,0.281 10 false 25 5.698,1.719 6.219,2 0.521,0.281 10 false 28 5.688,2.313 6.208,2.594 0.521,0.281 10 false 27 5.698,2.896 6.219,3.177 0.521,0.281 10 false 11 5.823,3.448 6.344,3.729 0.521,0.281 10 false F71 5.823,3.604 7.083,4.198 1.26,0.594 10 false Radio and Display Receiver Assembly 0.927,1.813 1.448,2.094 0.521,0.281 10 false ALO 5.958,0.625 6.479,0.906 0.521,0.281 10 false ADPG 5.969,1.219 6.49,1.5 0.521,0.281 10 false VAR+ 5.698,1.135 6.219,1.417 0.521,0.281 10 false 26 5.969,1.823 6.49,2.104 0.521,0.281 10 false VAL+ 5.958,2.417 6.479,2.698 0.521,0.281 10 false VA- 5.958,3 6.479,3.281 0.521,0.281 10 false AGND

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the F71 radio and display receiver assembly connector.


b.

Disconnect the F125 No. 1 stereo jack adapter assembly connector.


c.
E227392C55
1.5,0.219 1.958,0.5 0.458,0.281 1.5,2.271 1.958,2.552 0.458,0.281 2.104,1.458 2.781,1.177 false 2.208,1.604 2.073,1.958 false 2.104,1.604 1.594,1.958 false 2.438,1.604 2.969,1.958 false 2.323,1.604 2.479,1.958 false 1.573,3.823 1.323,4.146 false 1.844,3.823 2.021,4.156 false 1.99,3.823 2.313,3.823 false 1.427,3.833 1.135,3.833 false 1.708,3.813 1.708,4.198 false 2.823,1.083 3.25,1.229 0.427,0.146 10 false AGND 1.813,1.979 2.323,2.365 0.51,0.385 10 false VAR+ 1.156,1.885 1.719,2.167 0.563,0.281 10 false ADPG 2.885,1.979 3.25,2.125 0.365,0.146 10 false VAL+ 2.417,1.979 2.667,2.125 0.25,0.146 10 false VA- 0.177,0.167 0.604,0.771 0.427,0.604 10 false *a 1.604,0.281 2.073,0.531 0.469,0.25 10 false F71 2.365,3.74 2.792,3.917 0.427,0.177 10 false AGND 1.042,4.135 1.438,4.313 0.396,0.177 10 false ALO 2.021,4.177 2.469,4.365 0.448,0.188 10 false AUXO 0.177,2.229 0.563,2.542 0.385,0.313 10 false *b 0.813,3.75 1.25,3.927 0.438,0.177 10 false ARO 1.531,4.229 1.958,4.427 0.427,0.198 10 false ASGN 1.563,2.333 2.063,2.594 0.5,0.26 10 false F125
*a Front view of wire harness connector
(to Radio and Display Receiver Assembly)
*b Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F71-25 (ADPG) - F125-9 (AUXO) Always Below 1 Ω
F71-11 (AGND) - F125-10 (AGND) Always Below 1 Ω
F71-26 (VAR+) - F125-6 (ARO) Always Below 1 Ω
F71-28 (VAL+) - F125-7 (ALO) Always Below 1 Ω
F71-27 (VA-) - F125-8 (ASGN) Always Below 1 Ω
F71-25 (ADPG) - Body ground Always 10 kΩ or higher
F71-11 (AGND) - Body ground Always 10 kΩ or higher
F71-26 (VAR+) - Body ground Always 10 kΩ or higher
F71-28 (VAL+) - Body ground Always 10 kΩ or higher
F71-27 (VA-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR