84746
1.INSPECT TIRE PRESSURE WARNING RESET SWITCH
| *a | Component without harness connected
(Tire Pressure Warning Reset Switch) |
| *b | On |
| *c | Off |
Remove the tire pressure warning reset switch.
Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING RESET SWITCH>REMOVAL
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 (INT) - 2 (E) | On | Below 1 Ω |
| Off | 10 kΩ or higher |