Home › Drivetrain › UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE UNIT › 2016.11–2018.09
RM3160E _52 Drivetrain _060164 UA80E AUTOMATIC TRANSMISSION / TRANSAXLE _0298229 AUTOMATIC TRANSAXLE UNIT A

UA80E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE UNIT  DISASSEMBLY  


PROCEDURE

Hide 35572A 1.REMOVE TRANSMISSION CONTROL SHAFT LEVER

a.
C362350

Remove the nut, washer and transmission control shaft lever from the manual valve lever shaft sub-assembly.


Hide 84540 2.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.
C362351

Remove the 2 bolts and park/neutral position switch assembly from the automatic transaxle case sub-assembly.


Hide 35015S 3.REMOVE REFILL PLUG

a.
C362354

Remove the refill plug and gasket from the automatic transaxle case sub-assembly.


Hide 35405C 4.REMOVE OVERFLOW PLUG

a.
C362355

Using a 10 mm socket hexagon wrench, remove the overflow plug and gasket from the transaxle housing.


Hide 35125C 5.REMOVE NO. 1 TRANSMISSION OIL FILLER TUBE

a.
C362356

Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the transaxle housing.


Hide 32901C 6.REMOVE OIL COOLER UNION SUB-ASSEMBLY

a.
C362357C01
2.896,1.479 3.208,1.635 0.313,0.156 10 true *1
*1 Oil Cooler Union Bolt


Remove the bolt to separate the oil cooler union sub-assembly bracket portion from the automatic transaxle case sub-assembly.


b.

Remove the oil cooler union bolt, 2 gaskets and oil cooler union sub-assembly from the automatic transaxle case sub-assembly.


Hide 32905 7.REMOVE NO. 1 OIL COOLER OUTLET TUBE SUB-ASSEMBLY

a.
C362359C02
2.042,3.031 1.885,2.844 false 2.094,2.958 2.406,3.115 0.313,0.156 10 false *a
*a Lock Nut


Using a 19 mm union nut wrench, loosen the lock nut.


b.
C362360

Using a 17 mm union nut wrench, remove the No. 1 oil cooler outlet tube sub-assembly from the automatic transaxle case sub-assembly.


c.
C362361

Remove the O-ring from the No. 1 oil cooler outlet tube sub-assembly.


Hide 35151F 8.REMOVE TRANSMISSION CASE SIDE COVER

a.
C365942

Remove the 10 bolts and transmission case side cover from the automatic transaxle case sub-assembly.


Hide 82125J 9.REMOVE TRANSMISSION WIRE

a.
C361008C01
0.135,0.208 0.448,0.365 0.313,0.156 10 false *a 0.615,3.229 0.927,3.385 0.313,0.156 10 false *b
*a Connector A
*b Connector B


Disengage the clamp to disconnect the transmission wire from the solenoid lock plate.


b.

Disconnect the 9 solenoid valve connectors.

HINT:
·

Using a screwdriver, disconnect the solenoid valve connector A using the procedure shown in the illustration.

·

Using a screwdriver, disconnect the solenoid valve connector B using the procedure shown in the illustration.




c.
C361010

Remove the bolt and temperature sensor clamp and disconnect the temperature sensor from the transmission valve body assembly.


d.
C365878

Disconnect the transmission revolution sensor (NT) connector and transmission revolution sensor (NC) connector.


e.
C361015

Remove the bolt and transmission wire from the automatic transmission case sub-assembly.


Hide 35410 10.REMOVE TRANSMISSION VALVE BODY ASSEMBLY

a.
C361011

Disengage the clamp to disconnect the transmission revolution sensor (NC) wire connector.


b.
C361012

Remove the 9 bolts and transmission valve body assembly from the automatic transaxle case sub-assembly.


c.
C361027C01
1.74,0.271 1.948,0.479 0.208,0.208 10 true *1 0.833,1.604 1.01,1.781 0.177,0.177 10 true *3 2.417,1.667 2.583,1.854 0.167,0.188 10 true *1 2.375,1.958 2.552,2.135 0.177,0.177 10 true *1 0.906,1.979 1.083,2.146 0.177,0.167 10 true *2
*1 Transaxle Case Gasket
*2 No. 1 Front Oil Pump Cover Gasket
*3 No. 2 Front Oil Pump Cover Gasket


Remove the 2 transaxle case gaskets from the automatic transaxle case sub-assembly.


d.

Remove the transaxle case gasket from the counter drive gear sub-assembly.


e.

Remove the No. 1 front oil pump cover gasket from the front oil pump assembly.


f.

Remove the No. 2 front oil pump cover gasket from the front oil pump assembly.


Hide 89413N 11.REMOVE TRANSMISSION REVOLUTION SENSOR (NT)

a.
C361014

Remove the bolt and transmission revolution sensor (NT) from the automatic transaxle case sub-assembly.


Hide 89413S 12.REMOVE TRANSMISSION REVOLUTION SENSOR (NC)

a.
C361013

Remove the bolt and transmission revolution sensor (NC) from the counter drive gear sub-assembly.


Hide 35111C 14.REMOVE TRANSAXLE HOUSING

a.
C362561

Remove the 21 bolts.


b.
C362382

Using a plastic hammer, tap on the circumference of the transaxle housing to remove it from the automatic transaxle case sub-assembly.


c.
C365896C01
1.854,0.021 2.167,0.281 0.313,0.26 10 false *1 0.615,0.396 0.948,0.719 0.333,0.323 10 false *2 2.99,0.531 3.302,0.792 0.313,0.26 10 false *1 3.073,0.823 3.385,1.083 0.313,0.26 10 false *1 3.031,1.073 3.344,1.333 0.313,0.26 10 false *1 3.01,1.5 3.323,1.76 0.313,0.26 10 false *1
*1 Transaxle Case Gasket
*2 O-ring


Remove the 5 transaxle case gaskets from the front oil pump assembly.


d.

Remove the O-ring from the automatic transaxle case sub-assembly.


Hide 35174 15.REMOVE TRANSAXLE HOUSING OIL SEPARATOR

a.
C362388

Remove the 3 bolts and transaxle housing oil separator from the transaxle housing.


Hide 35394 16.REMOVE TRANSMISSION OIL CLEANER MAGNET

a.
C362389

Remove the 3 transmission oil cleaner magnets from the transaxle housing oil separator.


Hide 35394 17.INSPECT TRANSMISSION OIL CLEANER MAGNET

Hide 35882C 18.REMOVE DIFFERENTIAL GEAR LUBE APPLY TUBE

a.
C362390

Remove the differential gear lube apply tube from the transaxle housing.


Hide 35847C 19.REMOVE TRANSMISSION LUBE APPLY TUBE

a.
C362391

Remove the bolt and clamp from the transaxle housing.


b.
C362392

Remove the transmission lube apply tube from the transaxle housing.


Hide 20.REMOVE DIFFERENTIAL CASE ASSEMBLY

a.
C365897

Remove the differential case assembly from the automatic transaxle case sub-assembly.


Hide 35617 21.REMOVE CLUTCH DRUM OIL SEAL RING

a.
C362394

Remove the clutch drum oil seal ring from the front oil pump assembly.


Hide 35354 22.REMOVE OIL PUMP SPROCKET FRONT THRUST WASHER

a.
C362395

Remove the oil pump sprocket front thrust washer from the transmission oil pump drive sprocket.


Hide 35781C 23.REMOVE TRANSMISSION DRIVE CHAIN

a.
C362397

Remove the transmission drive chain together with the transmission oil pump drive sprocket and oil pump drive shaft sub-assembly from the front oil pump assembly.

NOTICE:

To avoid damaging the bush of the front oil pump assembly, remove the transmission drive chain, transmission oil pump drive sprocket and oil pump drive shaft sub-assembly horizontally relative to the front oil pump assembly.



Hide 35355 24.REMOVE OIL PUMP SPROCKET REAR THRUST WASHER

a.
C362398

Remove the oil pump sprocket rear thrust washer from the front oil pump assembly.


Hide 35409D 25.REMOVE MANUAL DETENT SPRING SUB-ASSEMBLY

a.
C362400

Remove the bolt and manual detent spring sub-assembly from the front oil pump assembly.


Hide 26.REMOVE FRONT OIL PUMP ASSEMBLY

NOTICE:

To avoid damaging the front oil pump assembly and transmission valve body assembly, when removing the front oil pump assembly, first remove the transmission valve body assembly.


a.
C362402

Remove the 7 bolts and front oil pump assembly from the automatic transaxle case sub-assembly.


Hide 35737 27.REMOVE PLANETARY CARRIER THRUST WASHER

a.
C362403

Remove the planetary carrier thrust washer from the C-3 and C-4 clutch sub-assembly.


Hide 34610 28.REMOVE C-3 AND C-4 CLUTCH ASSEMBLY

a.
C362405

Remove the C-3 and C-4 clutch assembly from the front planetary gear assembly.


Hide 35738 31.REMOVE NO. 2 PLANETARY CARRIER THRUST WASHER

a.
C362418

Remove the No. 2 planetary carrier thrust washer from the front planetary gear assembly.


Hide 35719B 32.REMOVE PLANETARY SUN GEAR

a.
C362420

Remove the planetary sun gear from the front planetary gear assembly.


Hide 35779A 33.REMOVE NO. 9 THRUST BEARING RACE

a.
C362421

Remove the No. 9 thrust bearing race from the front planetary gear assembly.


Hide 34.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C362422

Remove the thrust needle roller bearing from the front planetary gear assembly.


Hide 35778 35.REMOVE NO. 8 THRUST BEARING RACE

a.
C362421

Remove the No. 8 thrust bearing race from the front planetary gear assembly.


Hide 35720 36.REMOVE FRONT PLANETARY GEAR ASSEMBLY

a.
C362423

Remove the front planetary gear assembly from the front planetary ring gear.


Hide 37.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C362424

Remove the thrust needle roller bearing from the front planetary ring gear.


Hide 35777 38.REMOVE NO. 7 THRUST BEARING RACE

a.
C362426

Remove the No. 7 thrust bearing race from the front planetary gear assembly.


Hide 35712E 40.REMOVE INPUT SHAFT OIL SEAL RING

a.
C362428

Remove the 5 input shaft oil seal rings from the front planetary gear assembly.


Hide 35749B 41.REMOVE REAR INPUT SHAFT OIL SEAL RING

a.
C362429

Remove the 2 rear input shaft oil seal rings from the front planetary gear assembly.


Hide 35743 42.REMOVE FRONT PLANETARY RING GEAR

a.
C362430

Remove the front planetary ring gear with front planetary ring gear flange from the C-1 clutch assembly.


b.
C362431

Using a screwdriver with its tip wrapped with protective tape, remove the snap ring from the front planetary ring gear.

NOTICE:

Be careful not to damage the front planetary ring gear and front planetary ring gear flange.



c.
C362432

Remove the front planetary ring gear flange from the front planetary ring gear.


Hide 43.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C362433

Remove the thrust needle roller bearing from the C-1 clutch assembly.


Hide 35776 44.REMOVE NO. 6 THRUST BEARING RACE

a.
C362434

Remove the No. 6 thrust bearing race from the C-1 clutch assembly.


Hide 45.REMOVE C-1 CLUTCH ASSEMBLY

a.
C362435

Remove the C-1 clutch assembly from the sun gear input hub sub-assembly.


Hide 35633 47.REMOVE FRONT CLUTCH CLUTCH DISC

a.
C362437

Using a screwdriver with its tip wrapped in protective tape, remove the snap ring from the clutch drum sub-assembly.

NOTICE:

Be careful not to damage the clutch drum sub-assembly.



b.
C362438C01
1.875,0.188 2.063,0.271 false 1.833,2.667 1.833,0.917 1.833,0.917 2.01,0.917 false 1.833,2.667 2.01,2.667 false 1.844,1.365 2.021,1.365 false 1.646,1.823 2.01,1.823 false 1.833,2.25 2.01,2.25 false 3.198,2.781 3.198,0.677 3.198,0.677 3.031,0.677 false 3.042,2.49 3.198,2.49 false 3.031,2.042 3.198,2.042 false 3.031,1.594 3.198,1.594 false 3.042,1.135 3.198,1.135 false 1.688,0.104 2,0.26 0.313,0.156 10 false *1 3.125,2.813 3.323,3.01 0.198,0.198 10 false *2 1.438,1.729 1.75,1.885 0.313,0.156 10 false *3 1.115,0.479 1.427,0.635 0.313,0.156 10 false *a 1.125,1.146 1.438,1.302 0.313,0.156 10 false *b
*1 Forward Clutch Flange
*2 Front Clutch Clutch Disc
*3 Forward Multiple Disc Clutch Clutch Plate
*a Snap Ring Side
*b Front Clutch Clutch Disc Side


Remove the forward clutch flange, 5 front clutch clutch discs and 5 forward multiple disc clutch clutch plates from the clutch drum sub-assembly.


Hide 35668 49.REMOVE NO. 1 CLUTCH BALANCER

a.
C362439N01
1.281,0.552 1.615,0.219 false 2.219,1.792 2.802,1.531 true 1.688,0.125 2.146,0.323 0.458,0.198 10 false SST 1.885,1.729 2.198,1.885 0.313,0.156 10 true SST

Place SST on the No. 1 clutch balancer and compress the rear clutch piston return compression spring with a press.

SST
09387-00020  

NOTICE:

Do not compress the rear clutch piston return compression spring excessively.



b.

Using SST, remove the snap ring from the clutch drum sub-assembly.

SST
09350-30020  (09350-07070)


c.
C362440

Remove the No. 1 clutch balancer from the forward clutch piston.


Hide 35650B 50.REMOVE REAR CLUTCH PISTON RETURN COMPRESSION SPRING

a.
C362442

Remove the rear clutch piston return compression spring from the forward clutch piston.


Hide 35612B 51.REMOVE FORWARD CLUTCH PISTON

a.
C362443

Apply compressed air (392 kPa (4.0 kgf/cm2, 57 psi)) to the oil hole of the clutch drum sub-assembly to remove the forward clutch piston from the clutch drum sub-assembly.

NOTICE:
·

Applying compressed air may cause the forward clutch piston to jump out. When removing the forward clutch piston, hold it by hand using a piece of cloth.

·

Be careful as ATF may spray when applying compressed air.




b.
C362445

Remove the O-ring from the clutch drum sub-assembly.


c.
C362446

Remove the D-ring from the clutch drum sub-assembly.


Hide 35606M 52.REMOVE SUN GEAR INPUT HUB SUB-ASSEMBLY

a.
C362448

Remove the sun gear input hub sub-assembly from the counter drive gear sub-assembly.


Hide 53.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C362449

Remove the thrust needle roller bearing from the sun gear input hub sub-assembly.


Hide 35775K 54.REMOVE NO. 5 THRUST BEARING RACE

a.
C362450

Remove the No. 5 thrust bearing race from the sun gear input hub sub-assembly.


Hide 35506 55.REMOVE MANUAL VALVE LEVER SHAFT SUB-ASSEMBLY

a.
C362451

Remove the bolt.


b.
C362452

Align the cutouts of the manual valve lever sub-assembly and manual valve lever shaft sub-assembly, and remove the manual valve lever shaft sub-assembly.

HINT:

Rotating the manual valve lever shaft sub-assembly to the area shown in the illustration will align the cutouts.



c.
C362453

Remove the O-ring from the manual valve lever shaft sub-assembly.


Hide 35505 56.REMOVE MANUAL VALVE LEVER SUB-ASSEMBLY

a.
C362456

Remove the manual valve lever sub-assembly from the automatic transaxle case sub-assembly.


Hide 35596 57.REMOVE PAWL STOPPER PLATE

a.
C362457

Remove the 2 bolts and pawl stopper plate from the automatic transaxle case sub-assembly.


Hide 35506J 58.REMOVE MANUAL VALVE LEVER SHAFT RETAINER SPRING

a.
C362458

Remove the manual valve lever shaft retainer spring from the automatic transaxle case sub-assembly.


Hide 35501 59.REMOVE PARKING LOCK ROD SUB-ASSEMBLY

a.
C365917C01
2.198,3.865 2.313,3.719 2.313,3.719 2.427,3.719 false 2.052,4.104 2.146,4.365 2.146,4.365 2.25,4.365 false 2.448,3.625 2.76,3.823 0.313,0.198 10 false *1 2.292,4.281 2.594,4.49 0.302,0.208 10 false *2
*1 Manual Valve Lever Shaft Sub-assembly
*2 Parking Lock Rod Sub-assembly


Move the manual valve lever shaft sub-assembly and parking lock rod sub-assembly as shown in the illustration, and remove the parking lock rod sub-assembly.

HINT:

Align the cutouts of the parking lock rod sub-assembly and manual valve lever shaft sub-assembly and remove the parking lock rod sub-assembly.



Hide 35506 60.REMOVE MANUAL VALVE LEVER SHAFT SUB-ASSEMBLY

a.
C362461

Remove the manual valve lever shaft sub-assembly from the automatic transaxle case sub-assembly.


Hide 35557A 61.REMOVE PARKING LOCK PAWL TORSION SPRING

a.
C362463

Remove the parking lock pawl torsion spring from the automatic transaxle case sub-assembly.


Hide 35556 62.REMOVE PARKING LOCK PAWL SHAFT

a.
C362464

Remove the parking lock pawl shaft from the automatic transaxle case sub-assembly.


Hide 35557 63.REMOVE PARKING LOCK PAWL

a.
C362465

Remove the parking lock pawl from the automatic transaxle case sub-assembly.


Hide 35598 64.REMOVE PARKING LOCK SLEEVE

a.
C362466

Remove the parking lock sleeve from the automatic transaxle case sub-assembly.


Hide 35704C 66.REMOVE COUNTER DRIVE GEAR SUB-ASSEMBLY

a.
C362468C02
1.625,0.094 1.792,0.281 0.167,0.188 10 true *a 1.385,0.146 1.563,0.313 0.177,0.167 10 true *b 2.417,0.354 2.615,0.542 0.198,0.188 10 true *a 2.427,1.802 2.604,1.969 0.177,0.167 10 true *b 1.865,2.01 2.052,2.177 0.188,0.167 10 true *b 1.385,2 1.542,2.167 0.156,0.167 10 true *b 1.167,1.969 1.323,2.135 0.156,0.167 10 true *b 0.969,1.792 1.125,1.958 0.156,0.167 10 true *b
*a Bolt A
*b Bolt B


Using a T50 "TORX" socket wrench, remove the 2 bolts (A) from the counter drive gear sub-assembly.


b.

Remove the 6 bolts (B) from the counter drive gear sub-assembly.


c.
C362469

Remove the counter drive gear sub-assembly together with the pinion and counter driven gear sub-assembly from the automatic transaxle case sub-assembly.


d.
C362470

Remove the O-ring from the automatic transaxle case sub-assembly.


Hide 35681C 67.REMOVE NO. 1 BRAKE DISC

a.
C362471

Using a screwdriver with its tip wrapped in protective tape, remove the snap ring from the counter drive gear sub-assembly.

NOTICE:

Be careful not to damage the counter drive gear sub-assembly.



b.
C362472C01
1.917,2.448 1.75,2.448 1.75,2.448 1.75,0.75 true 1.75,0.75 1.917,0.75 false 1.76,0.208 1.938,0.313 false 1.604,1.885 1.906,1.885 false 3.063,1.052 3.25,1.052 3.25,1.052 3.25,3.063 false 3.073,2.76 3.25,2.76 false 3.073,1.625 3.24,1.625 false 3.073,2.177 3.24,2.177 false 1.75,1.313 1.917,1.313 false 1.552,0.115 1.865,0.271 0.313,0.156 10 false *1 1.396,1.792 1.708,1.948 0.313,0.156 10 false *2 3.167,3.104 3.344,3.292 0.177,0.188 10 false *3 0.979,0.344 1.292,0.5 0.313,0.156 10 false *a 0.979,0.99 1.292,1.146 0.313,0.156 10 false *b
*1 No. 1 Brake Flange
*2 No. 1 Brake Disc
*3 No. 1 Brake Plate
*a Snap Ring Side
*b No. 1 Brake Disc Side


Remove the No. 1 brake flange, 4 No. 1 brake discs and 4 No. 1 brake plates from the counter drive gear sub-assembly.


Hide 35739 69.REMOVE NO. 3 PLANETARY CARRIER THRUST WASHER

a.
C362474

Remove the No. 3 planetary carrier thrust washer from the rear planetary gear assembly.


Hide 35706V 70.REMOVE PLANETARY SUN GEAR SUB-ASSEMBLY

a.
C362476

Remove the planetary sun gear sub-assembly from the rear planetary gear assembly.


Hide 35706V 71.INSPECT PLANETARY SUN GEAR SUB-ASSEMBLY

Hide 35707D 72.REMOVE REAR PLANETARY SUN GEAR SUB-ASSEMBLY

a.
C362480

Remove the rear planetary sun gear sub-assembly from the C-2 clutch assembly.


Hide 35760 73.REMOVE REAR PLANETARY GEAR ASSEMBLY

a.
C362477

Remove the rear planetary gear assembly from the C-2 clutch assembly.


Hide 35729B 74.REMOVE NO. 4 PLANETARY CARRIER THRUST WASHER

a.
C362478

Remove the No. 4 planetary carrier thrust washer from the rear planetary gear assembly.


Hide 35785B 76.REMOVE NO. 4 THRUST BEARING RACE

a.
C362481

Remove the No. 4 thrust bearing race from the rear planetary sun gear sub-assembly.


Hide 77.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C362483

Remove the thrust needle roller bearing from the rear planetary sun gear sub-assembly.


Hide 35789U 78.REMOVE THRUST BEARING RACE

a.
C362485

Remove the thrust bearing race from the rear planetary sun gear sub-assembly.


Hide 35788D 79.REMOVE NO. 3 THRUST BEARING RACE

a.
C362487

Remove the No. 3 thrust bearing race from the rear planetary sun gear sub-assembly.


Hide 35707D 80.INSPECT REAR PLANETARY SUN GEAR SUB-ASSEMBLY

Hide 81.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C362488

Remove the thrust needle roller bearing from the C-2 clutch assembly.


Hide 35787C 82.REMOVE NO. 2 THRUST BEARING RACE

a.
C362489

Remove the No. 2 thrust bearing race from the C-2 clutch assembly.


Hide 84.REMOVE C-2 CLUTCH ASSEMBLY

a.
C362491

Remove the C-2 clutch assembly from the automatic transaxle case sub-assembly.


Hide 85.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C362492

Remove the thrust needle roller bearing from the C-2 clutch assembly.


Hide 35786A 86.REMOVE NO. 1 THRUST BEARING RACE

a.
C362493

Remove the No. 1 thrust bearing race from the automatic transaxle case sub-assembly.


Hide 35667B 87.REMOVE NO. 2 CLUTCH DISC

a.
C362495

Using a screwdriver with its tip wrapped in protective tape, remove the snap ring from the intermediate shaft sub-assembly.

NOTICE:

Be careful not to damage the intermediate shaft sub-assembly.



b.
C362496C01
1.875,2.583 1.875,0.979 1.875,0.979 2.042,0.979 false 2.042,1.51 1.698,1.51 false 2.052,2.583 1.875,2.583 false 2.052,2.052 1.875,2.052 false 3.302,2.698 3.302,0.74 3.302,0.74 3.135,0.74 false 3.302,1.26 3.125,1.26 false 3.302,1.813 3.135,1.813 false 3.302,2.333 3.135,2.333 false 2.115,0.271 1.885,0.188 false 1.677,0.094 1.875,0.281 0.198,0.188 10 false *1 3.219,2.719 3.406,2.896 0.188,0.177 10 false *2 1.5,1.417 1.813,1.573 0.313,0.156 10 false *3 1,0.365 1.313,0.521 0.313,0.156 10 false *a 1,1 1.313,1.156 0.313,0.156 10 false *b
*1 Direct Clutch Flange
*2 No. 2 Clutch Disc
*3 No. 2 Clutch Plate
*a Snap Ring Side
*b No. 2 Clutch Disc Side


Remove the direct clutch flange, 4 No. 2 clutch discs and 4 No. 2 clutch plates from the intermediate shaft sub-assembly.


Hide 35698A 89.REMOVE C-2 CLUTCH BALANCER

a.
C362497N01
0.427,0.677 0.573,0.51 false 2.406,1.698 2.969,1.281 false 0.115,0.615 0.458,0.792 0.344,0.177 10 false SST 2.083,1.625 2.427,1.802 0.344,0.177 10 false SST

Place SST on the C-2 clutch balancer and compress the clutch return spring sub-assembly with a press.

SST
09387-00020  

NOTICE:

Do not compress the clutch return spring sub-assembly excessively.



b.

Using SST, remove the snap ring from the intermediate shaft sub-assembly.

SST
09350-30020  (09350-07070)


c.
C362498

Remove the C-2 clutch balancer from the intermediate shaft sub-assembly.


Hide 35608N 90.REMOVE CLUTCH RETURN SPRING SUB-ASSEMBLY

a.
C362499

Remove the clutch return spring sub-assembly from the intermediate shaft sub-assembly.


Hide 35608N 91.INSPECT CLUTCH RETURN SPRING SUB-ASSEMBLY

Hide 35652E 92.REMOVE C-2 CLUTCH PISTON

a.
C362500

Apply compressed air (392 kPa (4.0 kgf/cm2, 57 psi)) to the oil hole of the intermediate shaft sub-assembly.

NOTICE:
·

Applying compressed air may cause the C-2 clutch piston to jump out. When removing the C-2 clutch piston, hold it by hand using a piece of cloth.

·

Be careful as ATF may spray when applying compressed air.




b.
C362501

Remove the C-2 clutch piston from the intermediate shaft sub-assembly.


c.
C362502

Remove the 2 O-rings from the intermediate shaft sub-assembly.


Hide 35653B 93.REMOVE DIRECT CLUTCH DRUM OIL SEAL RING

a.
C362503

Remove the 2 direct clutch drum oil seal rings from the automatic transaxle case sub-assembly.


Hide 35682 95.REMOVE 2ND BRAKE BRAKE DISC

a.
C362505

Using a screwdriver with its tip wrapped with protective tape, remove the snap ring from the automatic transaxle case sub-assembly.

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.



b.
C362506C01
1.979,0.906 1.979,2.677 1.979,2.677 2.188,2.677 true 1.979,0.906 2.198,0.906 false 1.979,1.344 2.188,1.344 false 1.802,1.781 2.188,1.781 false 1.979,2.219 2.188,2.219 false 3.094,0.646 3.26,0.646 3.26,0.646 3.26,2.729 false 3.104,1.115 3.26,1.115 false 3.104,1.563 3.26,1.563 false 3.104,2 3.26,2 false 3.094,2.438 3.26,2.438 false 1.969,0.208 2.198,0.333 false 1.75,0.125 2.063,0.281 0.313,0.156 10 false *1 3.177,2.76 3.365,2.927 0.188,0.167 10 false *2 1.573,1.688 1.75,1.865 0.177,0.177 10 false *3 1,0.448 1.313,0.604 0.313,0.156 10 false *a 1.01,1.115 1.323,1.271 0.313,0.156 10 false *b
*1 2nd Brake Brake Flange
*2 2nd Brake Brake Disc
*3 2nd Brake Brake Plate
*a Snap Ring Side
*b 2nd Brake Brake Disc Side


Remove the 2nd brake brake flange, 5 2nd brake brake discs and 5 2nd brake brake plates from the automatic transaxle case sub-assembly.


Hide 35623P 97.REMOVE NO. 2 1ST AND REVERSE BRAKE PISTON

a.
C362508

Remove the No. 2 1st and reverse brake piston from the automatic transaxle case sub-assembly.


Hide 35068 98.REMOVE 1ST AND REVERSE BRAKE RETURN SPRING SUB-ASSEMBLY

a.
C362509N01
1.969,0.99 2.813,0.604 true 0.531,0.531 1.635,1.313 true 2.875,0.531 3.333,0.729 0.458,0.198 10 false SST 0.219,0.448 0.677,0.646 0.458,0.198 10 false SST

Place SST on the 1st and reverse brake return spring sub-assembly and compress it with a press.

SST
09380-60011  (09381-06020, 09381-06050, 09381-06060, 09381-06100, 09381-06110)
09950-70010  (09951-07200)

NOTICE:

Do not compress the 1st and reverse brake return spring sub-assembly excessively.



b.
C362510

Using a screwdriver with its tip wrapped with protective tape, remove the snap ring from the automatic transaxle case sub-assembly.

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.



c.
C362511

Remove the 1st and reverse brake return spring sub-assembly from the automatic transaxle case sub-assembly.


Hide 35068 99.INSPECT 1ST AND REVERSE BRAKE RETURN SPRING SUB-ASSEMBLY

Hide 35623H 100.REMOVE 1ST AND REVERSE BRAKE PISTON

a.
C362513

Apply compressed air (approximately 392 kPa (4.0 kgf/cm2, 57 psi)) to the ATF hole to remove the 1st and reverse brake piston from the automatic transaxle case sub-assembly.


b.
C362514

Remove the 2 O-rings from the 1st and reverse brake piston.


Hide 41206A 101.REMOVE NEEDLE ROLLER BEARING

a.
C362517N01
0.385,2 1.24,1.698 true 0.719,2.792 1.417,2.281 true 0.073,1.927 0.531,2.125 0.458,0.198 10 false SST 0.396,2.708 0.854,2.906 0.458,0.198 10 false SST

Using SST, remove the needle roller bearing from the automatic transaxle case sub-assembly.

SST
09303-55010  
09502-12010  

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.



Hide 102.REMOVE MANUAL VALVE LEVER SHAFT OIL SEAL

a.
C362521

Using a screwdriver with its tip wrapped with protective tape, remove the manual valve lever shaft oil seal from the automatic transaxle case sub-assembly.

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.



Hide 103.REMOVE TRANSAXLE CASE OIL SEAL

a.
C362619E01
2.292,1.448 2.667,1.083 false 2.76,0.979 3.219,1.177 0.458,0.198 10 false SST

Using SST, remove the transaxle case oil seal from the transaxle housing.

SST
09308-36010  

NOTICE:

Be careful not to damage the transaxle housing.



Hide 43410M 104.REMOVE FRONT DRIVE SHAFT OIL SEAL RH

a.
C362527N01
0.479,0.521 0.979,0.885 false 0.167,0.438 0.625,0.635 0.458,0.198 10 false SST

Using SST, remove the front drive shaft oil seal RH from the transaxle housing.

SST
09308-36010  

NOTICE:

Be careful not to damage the transaxle housing.



Hide 43420H 105.REMOVE FRONT DRIVE SHAFT OIL SEAL LH

a.
C362529N01
2,0.573 2.292,0.927 false 1.677,0.49 2.135,0.688 0.458,0.198 10 false SST

Using SST, remove the front drive shaft oil seal LH from the automatic transaxle case sub-assembly.

SST
09308-36010  

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.



Hide 35605C 106.REMOVE NEEDLE ROLLER BEARING

a.
C362531N01
2.01,2.188 2.938,1.531 true 2.094,2.521 2.813,2.052 true 3.01,1.448 3.344,1.667 0.333,0.219 10 false SST 2.875,2 3.208,2.219 0.333,0.219 10 true SST

Using SST and a press, remove the needle roller bearing from the transaxle housing.

SST
09950-60010  (09951-00550)
09950-70010  (09951-07200)

NOTICE:

Be careful not to damage the transaxle housing.



Hide 41206A 107.REMOVE COUNTER DRIVEN GEAR REAR TAPERED ROLLER BEARING (OUTER RACE)

a.
C362533N01
2.063,0.958 2.417,0.729 false 2.479,0.667 2.938,0.865 0.458,0.198 10 false SST

Using SST, remove the counter driven gear rear tapered roller bearing (outer race) from the automatic transaxle case sub-assembly.

SST
09308-36010  

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.


HINT:
C362534

Align the claw of the SST with the indentation of the automatic transaxle case sub-assembly when removing the parts.



Hide 41206A 108.REMOVE COUNTER DRIVEN GEAR REAR TAPERED ROLLER BEARING (INNER RACE)

a.
C362536N01
1.177,0.448 1.719,0.896 false 2.146,1.76 2.719,2.094 true 0.844,0.365 1.302,0.563 0.458,0.198 10 false SST 2.802,2.042 3.26,2.24 0.458,0.198 10 false SST

Using SST, remove the counter driven gear rear tapered roller bearing (inner race) from the pinion and counter driven gear sub-assembly.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04030, 09954-04010, 09955-04011, 09957-04010, 09958-04011)
09950-60010  (09951-00310)

NOTICE:

Because SST is attached to the roller portion, there is a possibility that the roller portion could break and SST could come off before the counter driven gear tapered roller bearing (rear side inner race) comes off.



b.
C362537N01
1.24,0.365 1.719,0.75 false 2.125,1.771 2.604,2.156 true 0.927,0.302 1.385,0.5 0.458,0.198 10 false SST 2.677,2.104 3.135,2.302 0.458,0.198 10 false SST

If the roller portion breaks and SST comes off, reattach SST to the inner race in the position shown in the illustration, and continue removing the parts.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04030, 09954-04010, 09955-04011, 09957-04010, 09958-04011)
09950-60010  (09951-00310)


Hide 41206A 109.REMOVE COUNTER DRIVEN GEAR FRONT TAPERED ROLLER BEARING (OUTER RACE)

a.
C362539N01
1.406,1.219 2.135,1.052 false 2.188,0.979 2.646,1.177 0.458,0.198 10 false SST

Using SST, remove the counter driven gear front tapered roller bearing (outer race) and pinion and counter driven gear shim from the transaxle housing.

SST
09308-36010  

NOTICE:

Be careful not to damage the transaxle housing.


HINT:
C362540

Align the claw of the SST with the indentation of the transaxle housing when removing the parts.



Hide 41206A 110.REMOVE COUNTER DRIVEN GEAR FRONT TAPERED ROLLER BEARING (INNER RACE)

a.
C362542N01
1.771,0.906 2.083,0.552 false 1.656,2.271 1.99,2.417 false 0.51,2.573 1.083,1.979 true 2.156,0.469 2.615,0.667 0.458,0.198 10 false SST 2.063,2.344 2.521,2.542 0.458,0.198 10 false SST 0.177,2.49 0.635,2.688 0.458,0.198 10 false SST

Using SST, remove the counter driven gear front tapered roller bearing (inner race) from the pinion and counter driven gear sub-assembly.

SST
09950-00020  
09950-00030  
09950-60010  (09951-00380)


Hide 35104Q 111.REMOVE NO. 1 TRANSAXLE CASE PLUG

a.
C362544

Remove the 4 No. 1 transaxle case plugs from the automatic transaxle case sub-assembly.


b.
C362545

Remove the 4 No. 1 transaxle case plugs from the transaxle housing.


c.
C362546

Remove the 8 O-rings from the 8 No. 1 transaxle case plugs.


Hide 35104R 112.REMOVE NO. 2 TRANSAXLE CASE PLUG

a.
C362547

Using a 6 mm socket hexagon wrench, remove the 3 No. 2 transaxle case plugs and 3 gaskets from the automatic transaxle case sub-assembly.


b.
C362550

Using a 6 mm socket hexagon wrench, remove the 3 No. 2 transaxle case plugs and 3 gaskets from the transaxle housing.


Hide 35101E 113.REMOVE AUTOMATIC TRANSMISSION CASE STRAIGHT PIN

NOTICE:

It is not necessary to remove the automatic transmission case straight pins unless they are being replaced.


a.
C362611

Remove the 2 automatic transmission case straight pins from the automatic transaxle case sub-assembly.


Hide 35104B 114.REMOVE NO. 1 BREATHER PLUG (ATM)

a.
C365912C01
0.813,0.531 1.167,0.802 0.354,0.271 10 false *a
*a Push


Disengage each claw and remove the No. 1 breather plug (ATM) from the automatic transaxle case sub-assembly.

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.