Home › Engine / Hybrid System › CRUISE CONTROL › MILLIMETER WAVE RADAR SENSOR › from 2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0109284 MILLIMETER WAVE RADAR SENSOR A

CRUISE CONTROL  MILLIMETER WAVE RADAR SENSOR  REASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
·

Do not damage the millimeter wave radar sensor assembly.

·

If the No. 1 millimeter wave radar sensor bracket has been removed/installed, be sure to perform adjustment.



PROCEDURE

Hide 88215 1.INSTALL NO. 1 MILLIMETER WAVE RADAR SENSOR BRACKET

a.
E351632N01
1.344,1.198 1.5,1.396 0.156,0.198 10 true 1 2.292,1.292 2.448,1.49 0.156,0.198 10 true 2

Temporarily install the No. 1 millimeter wave radar sensor bracket with the 2 screws.


b.

Tighten the 2 screws to install the No. 1 millimeter wave radar sensor bracket.

HINT:

Tighten the screws in the order shown in the illustration.