Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM › from 2016.11
RM3160E _56 Audio / Visual / Telematics _019702 PARK ASSIST / MONITORING _0298312 PANORAMIC VIEW MONITOR SYSTEM D

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

This system has front, passenger side, driver side and television camera assemblies mounted around the vehicle to display around the vehicle on the multi-display. The display panel also shows a composite view consisting of the area behind the vehicle and parking guidelines to assist the driver in parking the vehicle by monitoring the area around the vehicle.


b.

This system consists of the following components:

i.

Parking assist ECU


ii.

Panoramic view monitor switch


iii.

Television camera assembly


iv.

Front television camera assembly


v.

Side television camera assembly LH


vi.

Side television camera assembly RH


vii.

Navigation receiver assembly*1


viii.

Radio and display receiver assembly*2


ix.

Network gateway ECU


x.

Steering Sensor


xi.

Skid control ECU


xii.

Main body ECU (multiplex network body ECU)


xiii.

Clearance warning ECU assembly


xiv.

ECM


xv.

Blind spot monitor sensor LH

*1: for Navigation Receiver Type

*2: for Radio and Display Type




c.

This system is equipped with a self-diagnosis system, which is operated from a designated window that appears on the display panel, just as in the navigation system.



FUNCTION OF COMPONENTS


a.

The parking assist ECU controls the system by using information from the following components.

Item Function
Television Camera Assembly
·

Mounted on the back door to transmit the rear view of the vehicle to the parking assist ECU.

·

Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and a wide-angle lens


Front Television Camera Assembly Generates a video feed showing the front side of the vehicle and transmits the video to the parking assist ECU
Side Television Camera Assembly LH Generates a video feed showing the left side of the vehicle and transmits the video to the parking assist ECU
Side Television Camera Assembly RH Generates a video feed showing the right side of the vehicle and transmits the video to the parking assist ECU
Parking Assist ECU
·

Turns the panoramic view monitor system ON and OFF according to the display conditions, based on the received panoramic view monitor switch signals, shift position signals, and vehicle speed signals

·

Transmits the display request signals for the panoramic view and wide front view screen, two-side view screen, panoramic view and rear view screen, wide rear view screen, narrow rear view screen, side view screen, see through view screen, or moving view screen to the navigation receiver assembly*1 or radio and display receiver assembly*2 according to the display conditions, based on the received panoramic view monitor switch signals, shift position signals, and vehicle speed signals

·

Transmits the display switching request signals for the side view and wide front view screen, two-side view screen, or side view and rear view screen to the navigation receiver assembly*1 or radio and display receiver assembly*2 according to the display conditions, based on the received outer mirror retraction signals

·

Displays the composite image of the surrounding area images taken by each camera and the image calculated from vehicle status information such as the steering angle signals on the navigation receiver assembly*1 or radio and display receiver assembly*2 screen

·

Renders each configuration page in the diagnosis window and outputs the screen to the navigation receiver assembly*1 or radio and display receiver assembly*2

·

Stops displaying the buttons and guidelines on the panoramic view and rear view monitor screen when the screen is being displayed and a back door open status signal is received

·

Stores each configuration setting from the diagnosis window


Panoramic View Monitor Switch Transmits switch operation signals to the parking assist ECU
·

Navigation Receiver Assembly*1

·

Radio and Display Receiver Assembly*2


Allows operations when the panoramic view monitor screen or diagnosis screen is displayed
Steering Sensor Transmits the steering angle signals and sensor status signals to the parking assist ECU via the CAN communication
Skid Control ECU Transmits the vehicle speed signals, drive type signals, and system status signals to the parking assist ECU via the CAN communication
ECM
·

Transmits the drivetrain information and 2WD/AWD information to the parking assist ECU via the CAN communication

·

Transmits the shift position signals to the parking assist ECU via the CAN communication


Main Body ECU (Multiplex Network Body ECU)
·

Transmits the back door courtesy light switch signal to the parking assist ECU via the CAN communication

·

Transmits the mirror retract request signal to the parking assist ECU via the CAN communication


Clearance Warning ECU Assembly Transmits information from each sonar via the CAN communication
Blind Spot Monitor Sensor LH Transmits the RCTA information signal via CAN communication

*1: for Navigation Receiver Type

*2: for Radio and Display Type




Panoramic View Screen Display


a.

See-through view screen

i.

The entire area surrounding the vehicle is displayed.

E348282C01
0.396,0.365 0.708,0.563 0.313,0.198 10 false *a 4.021,0.365 4.333,0.563 0.313,0.198 10 false *b
*a Vehicle interior view *b Upper view




b.

Moving view screen

i.

The entire area surrounding the vehicle is displayed.

E348283C01
0.406,0.365 0.719,0.563 0.313,0.198 10 false *a 4.021,0.365 4.333,0.563 0.313,0.198 10 false *b
*a Slant upper view *b Upper view




c.

Panoramic view and wide front view screen

E348284C01
2.833,0.865 2.906,0.292 2.906,0.292 3.042,0.292 false 2.885,0.906 3.156,0.521 3.156,0.521 3.313,0.521 false 2.896,1.229 3.229,1.677 3.229,1.677 3.396,1.677 false 1.375,1.583 0.573,0.958 0.573,0.958 0.438,0.958 false 1.208,1.656 0.563,1.26 0.563,1.26 0.417,1.26 false 6.198,0.865 6.271,0.292 6.271,0.292 6.406,0.292 false 6.25,0.896 6.521,0.51 6.521,0.51 6.677,0.51 false 5.094,1.573 5.25,0.354 5.25,0.354 5.406,0.354 false 5.24,1.646 5.563,0.51 5.563,0.51 5.729,0.51 false 0.74,0.49 1.052,0.688 0.313,0.198 10 false *a 4.104,0.49 4.417,0.688 0.313,0.198 10 false *b 0.313,0.865 0.625,1.063 0.313,0.198 10 false 1 0.292,1.188 0.604,1.385 0.313,0.198 10 false 1 3.083,0.188 3.396,0.385 0.313,0.198 10 false 1 3.458,1.583 3.771,1.781 0.313,0.198 10 false 2 3.344,0.417 3.656,0.615 0.313,0.198 10 false 1 5.448,0.25 5.76,0.469 0.313,0.219 10 false 1 5.781,0.406 6.094,0.625 0.313,0.219 10 false 1 6.458,0.188 6.771,0.406 0.313,0.219 10 false 1 6.729,0.417 7.042,0.635 0.313,0.219 10 false 1
*a Estimated course line display mode *b Distance guide line display mode


Panoramic View and Wide Front View Screen Description
Signal Name Color Panoramic View and Wide Front View Screen
Estimated course line display mode Distance guide line display mode
(1) Front distance guide line Blue Displayed Displayed
(2) Front wheel ground contact line Yellow Displayed Not displayed


d.

Two-side view screen description

E331767C02
2.229,1.313 2.49,0.375 2.49,0.375 2.646,0.375 false 2.292,1.458 3.354,0.865 3.354,0.865 3.51,0.865 false 5.688,1.448 6.75,0.854 6.75,0.854 6.906,0.854 false 2.229,1.573 2.313,2.354 2.313,2.354 2.469,2.354 false 5.656,1.594 5.74,2.375 5.74,2.375 5.896,2.375 false 0.531,0.354 0.844,0.552 0.313,0.198 10 false *a 2.698,0.26 3.01,0.458 0.313,0.198 10 false 1 3.844,0.406 4.156,0.604 0.313,0.198 10 false *b 2.531,2.26 2.844,2.458 0.313,0.198 10 false 2 3.563,0.771 3.875,0.969 0.313,0.198 10 false 3 5.938,2.281 6.25,2.479 0.313,0.198 10 false 2 6.958,0.76 7.125,0.979 0.167,0.219 10 false 3
*a Outer rear view mirror not retracted *b Outer rear view mirror retracted


Two-side View Screen Description
Signal Name Color
(1) Front distance guide line Red/Black
(2) Front wheel ground contact line Blue
(3) Vehicle width parallel line Blue


e.

Panoramic view and rear view screen

E348285C01
0.948,1.188 0.948,0.354 0.948,0.354 1.146,0.354 true 0.719,1.25 0.719,0.188 0.719,0.188 0.896,0.188 true 0.938,1.302 1.25,0.521 1.25,0.521 1.427,0.521 true 1.125,2.208 0.958,2.208 0.958,2.208 0.688,1.438 true 1.333,1.979 1.167,1.979 1.167,1.979 1.167,1.438 true 2.083,2.115 1.938,2.115 1.938,2.115 1.938,1.729 true 1.948,2.385 1.781,2.385 1.781,2.385 1.781,1.531 true 1.906,0.896 1.906,0.292 1.906,0.292 2.052,0.292 true 1.969,0.927 2.094,0.49 2.094,0.49 2.24,0.49 true 1.677,1.073 1.677,0.135 1.677,0.135 1.833,0.135 true 3.552,2.208 3.406,2.208 3.406,2.208 3.292,1.313 true 3.74,1.969 3.594,1.969 3.594,1.969 3.51,1.396 true 3.021,2.323 2.875,2.323 2.875,2.323 2.792,1.75 true 3.01,1.302 2.563,1.135 2.563,1.135 2.417,1.135 true 3.406,1.125 3.406,0.521 3.406,0.521 3.552,0.521 true 4.24,0.896 4.24,0.292 4.24,0.292 4.385,0.292 true 4.292,0.938 4.417,0.5 4.417,0.5 4.563,0.5 true 6.573,0.906 6.573,0.302 6.573,0.302 6.719,0.302 true 6.615,0.927 6.74,0.49 6.74,0.49 6.885,0.49 true 4.323,2.083 4.156,2.083 4.156,2.083 4.156,1.542 true 6.646,2.083 6.479,2.083 6.479,2.083 6.479,1.542 true 5.333,2.333 5.188,2.333 5.188,2.333 5.104,1.76 true 0.688,2.354 0.542,2.354 0.542,2.354 0.458,1.781 true 5.958,2.021 5.813,2.021 5.813,2.021 5.729,1.448 true 0.375,0.573 0.688,0.771 0.313,0.198 10 false *a 2.677,0.583 2.99,0.781 0.313,0.198 10 false *b 5,0.573 5.313,0.771 0.313,0.198 10 false *c 0.938,0.094 1.25,0.292 0.313,0.198 10 false 3 1.198,0.26 1.51,0.458 0.313,0.198 10 false 7 1.479,0.427 1.792,0.625 0.313,0.198 10 false 8 1.896,0.052 2.208,0.25 0.313,0.198 10 false 6 2.094,0.208 2.406,0.406 0.313,0.198 10 false 1 2.281,0.396 2.594,0.594 0.313,0.198 10 false 1 0.719,2.25 1.031,2.448 0.313,0.198 10 false *d 1.177,2.125 1.49,2.323 0.313,0.198 10 false 5 1.365,1.906 1.677,2.104 0.313,0.198 10 false 2 2.146,2.01 2.458,2.208 0.313,0.198 10 false 7 2,2.302 2.313,2.5 0.313,0.198 10 false 2 4.406,0.188 4.719,0.385 0.313,0.198 10 false 1 4.594,0.417 4.906,0.615 0.313,0.198 10 false 1 6.76,0.198 7.073,0.396 0.313,0.198 10 false 1 6.927,0.406 7.052,0.594 0.125,0.188 10 false 1 3.781,1.865 4.094,2.063 0.313,0.198 10 false 2 4.375,1.99 4.688,2.188 0.313,0.198 10 false 2 6.688,1.99 7,2.188 0.313,0.198 10 false 2 6,1.927 6.313,2.125 0.313,0.198 10 false 2 5.365,2.229 5.677,2.427 0.313,0.198 10 false *d 3.594,2.115 3.906,2.313 0.313,0.198 10 false 8 3.052,2.208 3.365,2.406 0.313,0.198 10 false *d 3.615,0.406 3.927,0.604 0.313,0.198 10 false 4 2.281,1.052 2.594,1.25 0.313,0.198 10 false 3
*a Estimated course line display mode *b Parking guide line display mode
*c Distance guide line display mode *d Guide line display mode switching button


HINT:

In the rear view screen, the screen display mode can be switched by pressing the guide line display mode switching button or rear view screen on the screen.


Panoramic View and Rear View Screen Description
Signal Name Color Panoramic View and Rear View Screen
Estimated course line display mode Parking guide line display mode Distance guide line display mode
(1) Front distance guide line Blue Displayed Displayed Displayed
(2) Rear distance guide line Red/Black Displayed Displayed Displayed
(3) Rear vehicle width extension line Blue Displayed Displayed Not displayed
(4) Parking guide line Blue Not displayed Displayed Not displayed
(5) Rear distance guide line Blue Displayed Not displayed Not displayed
(6) Side estimated course line Yellow Displayed Not displayed Not displayed
(7) Rear estimated course line Yellow Displayed Not displayed Not displayed
(8) Vehicle center line Blue Displayed Displayed Not displayed


f.

Wide rear view screen

E331769C02
1.125,1.208 1.26,0.208 1.26,0.208 1.396,0.208 true 1.219,1.323 1.563,0.385 1.563,0.385 1.698,0.385 true 1.458,1.292 1.927,0.573 1.927,0.573 2.063,0.573 true 3.458,1.167 3.604,0.271 3.604,0.271 3.74,0.271 true 3.552,1.302 3.896,0.365 3.896,0.365 4.031,0.365 true 3.844,1.344 4.167,0.615 4.167,0.615 4.302,0.615 true 5.979,1.469 6.219,2.292 6.219,2.292 6.354,2.292 true 5.188,1.802 5.375,2.438 5.375,2.438 5.51,2.438 true 3.74,1.438 3.979,2.26 3.979,2.26 4.115,2.26 true 2.865,1.802 3.052,2.438 3.052,2.438 3.188,2.438 true 1.51,1.448 1.719,2.25 1.719,2.25 1.854,2.25 true 0.948,1.448 1.24,2.521 1.24,2.521 1.375,2.521 true 0.51,1.813 0.635,2.25 0.635,2.25 0.771,2.25 true 0.302,0.552 0.615,0.708 0.313,0.156 10 false *a 2.646,0.552 2.958,0.708 0.313,0.156 10 false *b 4.958,0.563 5.271,0.719 0.313,0.156 10 false *c 0.813,2.156 1.125,2.313 0.313,0.156 10 false *d 3.219,2.323 3.531,2.479 0.313,0.156 10 false *d 5.542,2.323 5.854,2.479 0.313,0.156 10 false *d 1.448,0.104 1.76,0.26 0.313,0.156 10 false 5 1.76,0.292 2.073,0.448 0.313,0.156 10 false 6 2.094,0.469 2.406,0.625 0.313,0.156 10 false 2 3.792,0.177 4.104,0.333 0.313,0.156 10 false 3 4.083,0.26 4.396,0.417 0.313,0.156 10 false 6 4.354,0.521 4.667,0.677 0.313,0.156 10 false 2 6.406,2.198 6.719,2.354 0.313,0.156 10 false 1 4.188,2.177 4.5,2.333 0.313,0.156 10 false 1 1.938,2.177 2.281,2.375 0.344,0.198 10 false 1 1.438,2.417 1.781,2.615 0.344,0.198 10 false 4
*a Estimated course line display mode *b Parking guide line display mode
*c Distance guide line display mode *d Display mode switching button


HINT:

The screen changes to the panoramic view and rear view screen when the display mode switch button or rear view screen is selected.


Wide Rear View Screen Description
Signal Name Color Rear View Screen
Estimated course line display mode Parking guide line display mode Distance guide line display mode
(1) Rear distance guide line Red/Black Displayed Displayed Displayed
(2) Rear vehicle width extension line Blue Displayed Displayed Not displayed
(3) Parking guide line Blue Not displayed Displayed Not displayed
(4) Rear distance guide line Blue Displayed Not displayed Not displayed
(5) Rear estimated course line Yellow Displayed Not displayed Not displayed
(6) Vehicle center line Blue Displayed Displayed Not displayed


g.

Narrow rear view screen

E331770C02
0.833,1.281 1.021,0.344 1.021,0.344 1.156,0.344 false 1.198,1.396 1.458,0.375 1.458,0.375 1.594,0.375 false 1.625,1.417 1.802,0.604 1.802,0.604 1.938,0.604 false 3.354,1.188 3.417,0.49 3.417,0.49 3.552,0.49 false 3.531,1.385 3.896,0.24 3.896,0.24 4.031,0.24 false 3.885,1.313 4.063,0.448 4.063,0.448 4.198,0.448 false 1.188,1.563 1.375,2.344 1.375,2.344 1.51,2.344 false 1.656,1.542 1.802,2.208 1.802,2.208 1.938,2.208 false 0.5,1.792 0.604,2.271 0.604,2.271 0.74,2.271 false 2.865,1.781 2.969,2.26 2.969,2.26 3.104,2.26 false 5.177,1.813 5.281,2.292 5.281,2.292 5.417,2.292 false 3.729,1.552 3.896,2.24 3.896,2.24 4.031,2.24 false 6.104,1.563 6.271,2.25 6.271,2.25 6.406,2.25 false 0.333,0.563 0.646,0.719 0.313,0.156 10 false *a 2.667,0.552 2.979,0.708 0.313,0.156 10 false *b 4.979,0.542 5.292,0.698 0.313,0.156 10 false *c 0.792,2.146 1.104,2.302 0.313,0.156 10 false *d 3.135,2.135 3.448,2.292 0.313,0.156 10 false *d 5.458,2.188 5.771,2.344 0.313,0.156 10 false *d 1.198,0.25 1.51,0.448 0.313,0.198 10 false 5 1.667,0.271 1.979,0.469 0.313,0.198 10 false 6 2.01,0.521 2.323,0.719 0.313,0.198 10 false 2 3.583,0.406 3.896,0.604 0.313,0.198 10 false 3 4.083,0.135 4.396,0.333 0.313,0.198 10 false 6 4.26,0.375 4.573,0.573 0.313,0.198 10 false 2 6.448,2.146 6.76,2.302 0.313,0.156 10 false 1 4.073,2.135 4.385,2.292 0.313,0.156 10 false 1 1.573,2.26 1.885,2.417 0.313,0.156 10 false 1 1.979,2.135 2.292,2.292 0.313,0.156 10 false 4
*a Estimated course line display mode *b Parking guide line display mode
*c Distance guide line display mode *d Display mode switching button


HINT:

The screen changes to the panoramic view and rear view screen when the display mode switch button or rear view screen is selected.


Narrow Rear View Screen Description
Signal Name Color Rear View Screen
Estimated course line display mode Parking guide line display mode Distance guide line display mode
(1) Rear distance guide line Red/Black Displayed Displayed Displayed
(2) Rear vehicle width extension line Blue Displayed Displayed Not displayed
(3) Parking guide line Blue Not displayed Displayed Not displayed
(4) Rear distance guide line Blue Displayed Not displayed Not displayed
(5) Rear estimated course line Yellow Displayed Not displayed Not displayed
(6) Vehicle center line Blue Displayed Displayed Not displayed


h.

Side view screen

E359492C01
2.531,0.948 2.906,0.271 2.906,0.271 3.073,0.271 true 6,1.698 6.635,1.302 6.635,1.302 6.802,1.302 true 5.906,0.948 6.281,0.271 6.281,0.271 6.448,0.271 true 2.563,1.26 3.198,0.583 3.198,0.583 3.365,0.583 true 5.958,1.25 6.438,0.573 6.438,0.573 6.604,0.573 true 2.646,1.719 3.313,1.208 3.313,1.208 3.479,1.208 true 2.531,1.885 3.042,2.406 3.042,2.406 3.208,2.406 true 5.885,1.885 6.344,2.438 6.344,2.438 6.51,2.438 true 0.698,0.427 1.01,0.583 0.313,0.156 10 false *a 4.156,0.458 4.469,0.615 0.313,0.156 10 false *b 3.104,0.188 3.313,0.396 0.208,0.208 10 false 1 3.479,0.51 3.688,0.719 0.208,0.208 10 false 2 3.281,2.323 3.49,2.531 0.208,0.208 10 false 3 3.542,1.125 3.75,1.333 0.208,0.208 10 false 4 6.5,0.188 6.708,0.396 0.208,0.208 10 false 1 6.667,0.479 6.875,0.688 0.208,0.208 10 false 2 6.573,2.354 6.781,2.563 0.208,0.208 10 false 3 6.854,1.229 7.063,1.438 0.208,0.208 10 false 4
*a Side view and wide front view screen *b Side view and rear view screen


Side View Screen Description
Signal Name Color
(1) Front distance guide line Red
(2) Front wheel ground contact line Blue
(3) Rear wheel ground contact line Blue
(4) Vehicle width parallel line Blue

HINT:

Refer to the content of panoramic view and rear view screen and panoramic view and wide front view screen for information about the rear view and wide front view screens.




Panoramic View Screen Description


a.

Manual display mode

i.

When the panoramic view monitor switch is pressed with the ignition switch ON or the engine started, the panoramic view monitor system switches to a screen shown below according to the shift lever position

Screen Transition Chart (Manual Display Mode)
E348286C01
0.385,0.646 0.698,0.844 0.313,0.198 10 false *a 1.125,2.115 1.438,2.313 0.313,0.198 10 false *d 0.396,5.438 0.708,5.635 0.313,0.198 10 false *c 1.25,8.417 1.563,8.615 0.313,0.198 10 false *k 1.479,6.948 1.792,7.146 0.313,0.198 10 false *i 3.458,7.719 3.771,7.917 0.313,0.198 10 false *j 2.313,3.844 2.625,4.042 0.313,0.198 10 false *f 5.688,5.125 6,5.323 0.313,0.198 10 false *h 5.656,3.719 5.969,3.917 0.313,0.198 10 false *g 5.792,2.083 6.104,2.281 0.313,0.198 10 false *e 3.51,1.083 3.667,1.281 0.156,0.198 10 false 1 4.604,2.052 4.76,2.25 0.156,0.198 10 false 1 0.5,3.833 0.656,4.031 0.156,0.198 10 false 2 1.521,4.865 1.677,5.063 0.156,0.198 10 false 2 4.167,5.104 4.323,5.302 0.156,0.198 10 false 2 1.51,2.75 1.667,2.948 0.156,0.198 10 false 4 0.76,3.823 0.917,4.021 0.156,0.198 10 false 4 4.115,2.771 4.271,2.969 0.156,0.198 10 false 3 2.156,4.844 2.781,5.094 0.625,0.25 10 false 3, 5 or 7 2.76,6.271 2.917,6.469 0.156,0.198 10 false 8 2.813,8.083 2.969,8.281 0.156,0.198 10 false 9 1.469,7.146 1.698,7.313 0.229,0.167 10 false 10 4.135,3.469 4.292,3.667 0.156,0.198 10 false 6 4.021,4.01 4.51,4.229 0.49,0.219 10 false 1 or 5 5.094,3.781 5.354,4 0.26,0.219 10 false 12 6.229,3.781 6.573,3.979 0.344,0.198 10 false 11 2.156,2.729 2.646,2.896 0.49,0.167 10 false 5 or 7 4.646,2.521 4.958,2.719 0.313,0.198 10 false *b
*a Shift lever not in P or R *b Shift lever in P and TOYOTA parking assist-sensor system on
*c Shift lever in R *d Panoramic view and wide front view screen
*e Two-side view screen *f Navigation screen, etc.
*g See-through view screen *h Moving view screen
*i Panoramic view and rear view screen *j Wide rear view screen
*k Narrow rear view screen - -


Screen Transition Conditions (Manual Display Mode)
No. Screen Transition Conditions
(1) Panoramic view monitor switch is pressed
(2) Shift lever is moved to R
(3) Shift lever is moved to other than P or R
(4) Shift lever is moved to other than P or R and operation (1) is performed
(5) "HOME" switches, etc. on the multi-display are pressed
(6) Operation (1) is performed with the shift lever in P
(7) Shift lever is moved to P
(8) Switch image mode button or rear view screen is selected
(9) Switch image mode button or wide rear view screen is selected
(10) Switch image mode button or narrow rear view screen is selected
(11) See through view switch button is selected
(12) Moving view switch button is selected

HINT:

If the panoramic view monitor switch is pressed at a vehicle speed of approximately 20 km/h (12 mph) or lower, the panoramic view monitor system screen is displayed. If the vehicle speed exceeds approximately 20 km/h (12 mph), the display switches to the navigation screen or information settings screen.




b.

Screen transition chart (automatic display mode)

i.

When the shift lever is not in P or R, in addition to switching screens by pressing the panoramic view monitor switch, the automatic display mode can be selected by pressing the automatic display mode switching button.

E348287C01
1.135,2.396 0.99,2.396 0.99,2.396 0.875,2.042 false 4.833,2.406 4.688,2.406 4.688,2.406 4.573,2.052 false 0.646,0.552 0.958,0.75 0.313,0.198 10 false *a 4.302,0.563 4.615,0.76 0.313,0.198 10 false *b 1.156,2.281 1.469,2.479 0.313,0.198 10 false *c 4.854,2.302 5.167,2.5 0.313,0.198 10 false *c
*a Panoramic view and wide front view screen *b Two-side view screen
*c Automatic display mode - -


Automatic Display Mode Switching Button
(Indicator in Button)
Screen Switching Mode
ON
(Illuminated)
Automatic display mode
OFF
(Not illuminated)
Manual display mode

HINT:
·

In the automatic display mode, press the panoramic view monitor switch or panel switch to switch screens in the same way as the manual display mode.

·

When switching to the navigation screen, etc. in the automatic display mode, the display switches to the screen that was displayed last. However, the display switches to the panoramic view and wide front view screen if the shift lever is not in P or R after the ignition switch is turned from off to ON.




ii.

The automatic display mode automatically switches the display according to the vehicle status.

Screen Transition Chart (Automatic Display Mode)
E348288C01
0.427,0.219 0.74,0.417 0.313,0.198 10 false *a 5.438,1.885 5.75,2.083 0.313,0.198 10 false *c 3.521,1.26 3.833,1.458 0.313,0.198 10 false 1 1.083,2.5 1.396,2.698 0.313,0.198 10 false 1 2.313,2.469 2.625,2.667 0.313,0.198 10 false 2 1.552,3.688 1.865,3.885 0.313,0.198 10 false *d 3.521,3.375 3.833,3.573 0.313,0.198 10 false 3 4,3.833 4.313,4.031 0.313,0.198 10 false 4 4.49,4.323 4.802,4.521 0.313,0.198 10 false 1 1.458,1.906 1.771,2.104 0.313,0.198 10 false *b
*a Shift lever not in P or R *b Panoramic view and wide front view screen
*c Two-side view screen *d Navigation screen, etc.


Screen Transition Conditions (Automatic Display Mode)
No. Screen Transition Conditions
(1) Panoramic view monitor switch is pressed
(2) Current location switches, etc. on the multi-display are pressed
(3) Vehicle speed changes from above approximately 10 km/h (6 mph) to approximately 10 km/h (6 mph) or lower. The screen that was last displayed is displayed on the multi-display*
(4) Vehicle speed changes from approximately 12 km/h (7 mph) or lower to above approximately 12 km/h (7 mph)

*: The panoramic view and wide front view screen is the first screen displayed after the ignition switch was turned off.




c.

Panoramic View Zoom Function

i.

When detail within the image on the panoramic view screen is too small and difficult to see, the user can magnify the image by selecting one of the 4 areas on the panoramic view screen.

Screen Transition
E362406C01
2.448,1.458 2.615,1.875 2.615,1.875 2.781,1.875 false 2.448,3.854 2.615,4.271 2.615,4.271 2.781,4.271 false 0.333,0.365 0.646,0.521 0.313,0.156 10 false *a 0.302,2.719 0.615,2.875 0.313,0.156 10 false *b 1.656,1.667 1.969,1.823 0.313,0.156 10 false *c 5.292,1.688 5.604,1.844 0.313,0.156 10 false *d 2.792,1.792 3.104,1.948 0.313,0.156 10 false *e 1.625,4.073 1.938,4.229 0.313,0.156 10 false *f 5.365,4.021 5.75,4.396 0.385,0.375 10 false *g 2.823,4.188 3.135,4.344 0.313,0.156 10 false *e 2.875,0.427 3.188,0.583 0.313,0.156 10 false 1 2.896,2.844 3.208,3 0.313,0.156 10 false 1 4.125,3.563 4.438,3.719 0.313,0.156 10 false 2 4.125,1.26 4.438,1.417 0.313,0.156 10 false 2
*a Panoramic view and wide front view screen displayed while shift lever is not in P or R *b Panoramic view and rear view screen displayed
*c Panoramic view and wide front view screen *d Panoramic view and wide front view screen (Front left view magnified)
*e Panoramic view screen *f Panoramic view and rear view screen
*g Panoramic view and rear view screen (Front left view magnified) - -


Screen Transition Conditions
No. Screen Transition Conditions
(1) Any of the 4 areas on the panoramic view screen is selected while the vehicle speed is approximately 12 km/h (7 mph) or less and the Toyota parking assist-sensor system is turned on.
(2) The remote touch switch is pressed on the panoramic view zoom screen, or either of the following conditions is met:
·

The vehicle speed changes from approximately 12 km/h (7 mph) or less to over approximately 12 km/h (7 mph).

·

The Toyota parking assist-sensor system is turned off.





d.

When the outer rear view mirror assembly is retracted

i.

When the outer rear view mirrors are retracted, the screen changes according to the current screen display, as follows.

Screen Transition
E348289C01
0.479,0.042 0.792,0.24 0.313,0.198 10 false *a 0.479,1.385 0.792,1.583 0.313,0.198 10 false *b 0.49,2.729 0.802,2.927 0.313,0.198 10 false *c 0.479,4.052 0.792,4.25 0.313,0.198 10 false *d 4.802,1.375 5.115,1.573 0.313,0.198 10 false *f 0.49,5.438 0.802,5.635 0.313,0.198 10 false *e 4.792,4.083 5.104,4.281 0.313,0.198 10 false *g 4.792,5.448 5.104,5.646 0.313,0.198 10 false *h 3.438,1.302 3.75,1.5 0.313,0.198 10 false 1 3.479,2.208 3.792,2.406 0.313,0.198 10 false 1 3.51,3.188 3.823,3.385 0.313,0.198 10 false 1 3.469,4.885 3.781,5.083 0.313,0.198 10 false 1 3.479,6.25 3.792,6.448 0.313,0.198 10 false 1
*a See through view screen *b Moving view screen
*c Panoramic view and wide front view screen *d Panoramic view and rear view screen
*e Two side view screen (Outer rear view mirror assembly is extracted) *f Side view and wide front view screen
*g Side view and rear view screen *h Two side view screen (Outer rear view mirror assembly is retracted)


Screen Transition Conditions
No. Screen Transition Conditions
(1) When outer rear view mirror assembly is retracted




OPERATION EXPLANATION


a.

The reverse position signal is sent from the shift lever position switch to the parking assist ECU when the shift lever is moved to R.


b.

An appropriate steering angle and timing information can be provided for the driver. This is based on the information from the steering angle sensor signal and the vehicle angle data signal that are sent to the parking assist ECU.

HINT:

The steering angle sensor signal is used to control parking assist only for estimated guide line mode.




COMMUNICATION SYSTEM OUTLINE


a.

CAN communication system

i.

The panoramic view monitor system uses CAN communication for data communications between the parking assist ECU and each ECU.


ii.

If a problem occurs in the CAN communication line, the parking assist ECU outputs a CAN communication malfunction DTC. (To check, use the GTS.)

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DTC CHECK / CLEAR


iii.

If a problem occurs in the CAN communication line, the parking assist ECU outputs a CAN communication malfunction DTC. (To check, use the multi-display diagnosis screen.)

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DIAGNOSIS SYSTEM


iv.

If a CAN communication line malfunction DTC is output, repair the malfunction in the communication line and troubleshoot the panoramic view monitor system when data communication is normal.


v.

Since the CAN communication line has its own length and route, it cannot be repaired temporarily with a bypass wire, etc.



b.

AVC-LAN communication system

E335962E05
0.708,3.49 4.99,3.688 4.281,0.198 10 false : AVC-LAN Communication Line 1.323,1.656 5.906,1.854 4.583,0.198 10 false Navigation Receiver Assembly*1 1.083,2.031 5.667,2.229 4.583,0.198 10 false Radio and Display Receiver Assembly*2 0.146,2.5 4.729,2.698 4.583,0.198 10 false *1: for Navigation Receiver Type 0.146,2.938 4.729,3.135 4.583,0.198 10 false *2: for Radio and Display Type 4.51,1.635 7.156,1.844 2.646,0.208 10 false Parking Assist ECU 3.354,3.479 5.646,3.677 2.292,0.198 10 false : Master Device 5.292,3.469 7.156,3.688 1.865,0.219 10 false : Slave Device

i.

The panoramic view monitor system uses the AVC-LAN to communicate with other equipment.


ii.

The master device for the AVC-LAN is the navigation receiver assembly*1 or radio and display receiver assembly*2


iii.

Resistance necessary for communication transfer (60 to 80 Ω between the TX+ - TX- terminals) is inside the navigation receiver assembly*1 or radio and display receiver assembly*2

*1: for Navigation Receiver Type

*2: for Radio and Display Type



iv.

If a malfunction such as a communication line short, +B short, or GND short occurs in the AVC-LAN circuit, communication is interrupted and the panoramic view monitor system and navigation system do not operate normally.




VIDEO SIGNALS


a.

Video signal circuit

E335963E06
0.115,1.448 5.01,1.646 4.896,0.198 10 false Front Television Camera Assembly 0.031,3.323 4.927,3.521 4.896,0.198 10 false Side Television Camera Assembly LH 0.031,5.229 4.927,5.427 4.896,0.198 10 false Side Television Camera Assembly RH 0.052,7.031 4.948,7.229 4.896,0.198 10 false Television Camera Assembly 2.99,6.969 5.74,7.167 2.75,0.198 10 false Parking Assist ECU 0.885,7.75 4.406,7.948 3.521,0.198 10 false : Analog Display Signal 0.885,8.146 4.406,8.344 3.521,0.198 10 false : AVC-LAN Communication Line 2.958,7.75 6.479,7.948 3.521,0.198 10 false : Display Signal Direction 5.354,3.594 6.552,3.958 1.198,0.365 10 false Navigation Receiver Assembly*1 5.104,4.292 6.792,4.667 1.688,0.375 10 false Radio and Display Receiver Assembly*2 4.448,5.5 6.583,5.76 2.135,0.26 10 false *1: for Navigation Receiver Type 4.448,6 6.906,6.25 2.458,0.25 10 false *2: for Radio and Display Type

i.

Video signals from the front television camera assembly are input into the parking assist ECU via analog communication lines (vehicle wire harness).


ii.

Video signals from the side television camera assembly LH are input into the parking assist ECU via analog communication lines (vehicle wire harness).


iii.

Video signals from the side television camera assembly RH are input into the parking assist ECU via analog communication lines (vehicle wire harness).


iv.

Video signals from the television camera assembly are input into the parking assist ECU via analog communication lines (vehicle wire harness).


v.

Video signals from the parking assist ECU are input into the navigation receiver assembly*1 or radio and display receiver assembly*2 via AVC-LAN communication line.

*1: for Navigation Receiver Type

*2: for Radio and Display Type




b.

Screen display

i.

Video signals input from each camera are processed in the parking assist ECU and displayed on the navigation receiver assembly*1 or radio and display receiver assembly*2 as the panoramic view monitor system screen.

*1: for Navigation Receiver Type

*2: for Radio and Display Type





DIAGNOSTIC FUNCTION OUTLINE


a.

This panoramic view monitor system has a diagnostic function displayed in the navigation receiver assembly*1 or radio and display receiver assembly*2. This function enables the calibration (adjustment and verification) of the panoramic view monitor system.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DIAGNOSIS SYSTEM

*1: for Navigation Receiver Type

*2: for Radio and Display Type



b.

The panoramic view monitor system can check the following items by using the GTS.

Item Proceed to
DTC (Click here)
Data List / Active Test (Click here)



CALIBRATION


a.

Use the panoramic view monitor system diagnosis screen for calibration and checking of the panoramic view monitor system.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DIAGNOSIS SYSTEM

NOTICE:

Part replacement and work performed during servicing may require calibration of the panoramic view monitor system and other systems.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>CALIBRATION