Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM › from 2016.11
RM3160E _56 Audio / Visual / Telematics _019702 PARK ASSIST / MONITORING _0298312 PANORAMIC VIEW MONITOR SYSTEM U

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM  TERMINALS OF ECU  


PARKING ASSIST ECU


B402421E04
4.49,0.604 4.896,0.833 0.406,0.229 2.177,0.604 2.583,0.833 0.406,0.229 2.229,0.625 2.646,0.854 0.417,0.229 10 false F130 4.552,0.625 5.094,0.854 0.542,0.229 10 false F131

a.

Disconnect the F131 parking assist ECU connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F131-2 (+B) - F131-3 (GND1) B - W-B Power source signal Always 11 to 14 V
F131-3 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
F131-6 (IG) - F131-3 (GND1) R - W-B IG power source signal Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
F131-1 (ACC) - F131-3 (GND1) LG - W-B ACC power source signal Ignition switch ACC 11 to 14 V
Ignition switch off Below 1 V


c.

Reconnect the F131 parking assist ECU connector.


d.

Measure the voltage, resistance and waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F131-9 (TX-) W AVC-LAN communication signal - -
F131-10 (TX+) SB AVC-LAN communication signal - -
F130-1 (CV+) - F130-9 (CGND) R - Shielded Television camera assembly display signal input Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
F130-3 (CB+) - F130-9 (CGND) B - Shielded Power source to television camera assembly Ignition switch ACC 5.5 to 7.05 V
F131-20 (BLSW) - F131-3 (GND1) V - W-B Panoramic view monitor switch switch signal Ignition switch ON, panoramic view monitor switch off 5.5 to 6.5 V
Ignition switch ON, panoramic view monitor switch on Below 1 V
F130-9 (CGND) - Body ground Shielded - Body ground Television camera assembly ground (shield) Always Below 1 Ω
F130-2 (CV-) - F131-3 (GND1) W - W-B Television camera assembly ground Always Below 1 V
F130-11 (LCV-) - F131-3 (GND1) W - W-B Side television camera assembly LH ground Always Below 1 Ω
F130-10 (LCV+) - F130-24 (LGND) B - Shielded Side television camera assembly LH display signal input Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
F130-24 (LGND) - Body ground Shielded - Body ground Side television camera assembly LH ground (shield) Always Below 1 Ω
F130-12 (LCB+) - F130-24 (LGND) R - Shielded Power source to side television camera assembly LH Ignition switch ACC 5.5 to 7.05 V
F130-14 (BCV-) - F131-3 (GND1) W - W-B Front television camera assembly ground Always Below 1 Ω
F130-13 (BCV+) - F130-27 (BGND) B - Shielded Front television camera assembly display signal input Waveform 1: Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Waveform 2: Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
F130-27 (BGND) - Body ground Shielded - Body ground Front television camera assembly ground (shield) Always Below 1 Ω
F130-15 (BCB+) - F130-27 (BGND) R - Shielded Power source to front television camera assembly Ignition switch ACC 5.5 to 7.05 V
F130-5 (RCV-) - F131-3 (GND1) R - W-B Side television camera assembly RH ground Always Below 1 Ω
F130-4 (RCV+) - F130-18 (RGND) W - Shielded Side television camera assembly RH display signal input Waveform 1: Ignition switch ON, panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Waveform 2: Ignition switch ON, panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
F130-18 (RGND) - Body ground Shielded - Body ground Side television camera assembly RH ground (shield) Always Below 1 Ω
F130-6 (RCB+) - F130-18 (RGND) B - Shielded Power source to side television camera assembly RH Ignition switch ACC 5.5 to 7.05 V


e.
E265840C04
0.823,2.073 1,2.073 1,2.073 1.125,1.583 false 1.479,2.063 1.344,2.063 1.344,2.063 1.229,1.479 false 0.781,4.167 0.958,4.167 0.958,4.167 1.156,3.594 false 1.521,4.125 1.385,4.125 1.385,4.125 1.271,3.542 false 0.229,0.229 0.542,0.427 0.313,0.198 10 *a 0.396,1.052 0.76,1.313 0.365,0.26 10 GND 0.396,3.208 0.76,3.469 0.365,0.26 10 GND 0.26,2.271 0.625,2.531 0.365,0.26 10 *b 0.646,4.073 1.01,4.333 0.365,0.26 10 *c 0.656,1.979 1.021,2.24 0.365,0.26 10 *c 1.51,1.969 1.875,2.229 0.365,0.26 10 *d 1.542,4.052 1.906,4.313 0.365,0.26 10 *d
*a Waveform 1 (camera lens is not covered, displaying an image)
*b Waveform 2 (camera lens is covered, blacking out the screen)
*c Synchronization Signal
*d Video Waveform


Reference (Oscilloscope waveform):

HINT:

A waterproof connector is used for the television camera assembly, front television camera assembly, side television camera assembly LH or side television camera assembly RH. Therefore, inspect the waveform at the radio receiver assembly with the connector connected.


i.

Waveform 1 (camera lens is not covered, displaying an image)

Item Content
Measurement terminal
·

F130-1 (CV+) - F130-9 (CGND)

·

F130-10 (LCV+) - F130-24 (LGND)

·

F130-13 (BCV+) - F130-27 (BGND)

·

F130-4 (RCV+) - F130-18 (RGND)


Measurement setting 200 mV/DIV., 50 μs./DIV.
Condition Ignition switch ON, panoramic view monitor switch on

HINT:
·

The video waveform changes according to the image sent by the television camera assembly, front television camera assembly, side television camera assembly LH or side television camera assembly RH.

·

The video waveform is constantly output when the ignition switch is ACC.




ii.

Waveform 2 (camera lens is covered, blacking out the screen)

Item Content
Measurement terminal
·

F130-1 (CV+) - F130-9 (CGND)

·

F130-10 (LCV+) - F130-24 (LGND)

·

F130-13 (BCV+) - F130-27 (BGND)

·

F130-4 (RCV+) - F130-18 (RGND)


Measurement setting 200 mV/DIV., 50 μs./DIV.
Condition Ignition switch ON, panoramic view monitor switch on

HINT:
·

The video waveform changes according to the image sent by the television camera assembly, front television camera assembly, side television camera assembly LH or side television camera assembly RH.

·

The video waveform is constantly output when the ignition switch is ACC.