Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TELEVISION CAMERA(for Side) › from 2016.11
RM3160E _56 Audio / Visual / Telematics _019702 PARK ASSIST / MONITORING _0298530 TELEVISION CAMERA(for Side) A

PARK ASSIST / MONITORING  TELEVISION CAMERA(for Side)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 3.REMOVE OUTER MIRROR COVER WITH LOWER HOUSING

Hide 4.REMOVE SIDE TELEVISION CAMERA ASSEMBLY WITH COVER

a.
B429218C02
0.24,0.604 0.688,0.781 true 0.375,0.323 0.896,0.771 true 2.5,0.51 2.042,0.208 2.042,0.208 2.729,0.5 true 0.052,0.469 0.365,0.625 0.313,0.156 10 false *a 0.188,0.177 0.5,0.333 0.313,0.156 10 false *b 1.854,0.063 2.167,0.219 0.313,0.156 10 false *c
*a Claw
*b Protrusion
*c Insert Position


Insert a 0.9 mm (0.0354 in.) spark plug gap gauge or similar tool into the connector as shown in the illustration, lift the claw and disconnect the connector.

NOTICE:
·

Insert the spark plug gap gauge to the point that the claw becomes the same height as the protrusion of the connector housing. If the spark plug gap gauge is inserted too far, or if the claw is lifted directly using a screwdriver, the claw may be damaged.

·

If the claw on the connector is damaged, replace the outer rear view mirror assembly.




b.
E357418

Disconnect the connector to remove the side television camera assembly with cover.


Hide 86790F 5.REMOVE SIDE TELEVISION CAMERA ASSEMBLY

a.
E357419

Remove the 2 screws and side television camera assembly.