Home › Engine / Hybrid System › 2GR-FKS (ENGINE MECHANICAL) › FRONT CRANKSHAFT OIL SEAL › from 2016.11
RM3160E _51 Engine / Hybrid System _060157 2GR-FKS ENGINE MECHANICAL _0298897 FRONT CRANKSHAFT OIL SEAL A

2GR-FKS ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 13471 2.REMOVE CRANKSHAFT PULLEY

a.
A369429C01
0.635,1.594 1.281,0.438 1.281,0.438 2.094,0.823 true 1.635,2.375 1.281,0.448 true 2.781,2.406 3.094,2.563 0.313,0.156 10 false *a 1.135,0.24 1.594,0.438 0.458,0.198 10 false SST
*a Hold
V100135

Turn


Using SST to hold the crankshaft pulley, loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.

SST
09213-70011  (09213-70020)
09330-00021  


b.
A369430C01
1.313,2.063 0.979,0.552 0.979,0.552 2.167,0.552 true 0.167,1.781 0.479,1.938 0.313,0.156 10 false *a 0.646,0.469 1.104,0.667 0.458,0.198 10 false SST
*a Hold
V100135

Turn


Using SST, remove the crankshaft pulley set bolt and crankshaft pulley.

SST
09950-50013  (09951-05010, 09952-05010, 09953-05020, 09954-05021)


Hide 11301C 3.REMOVE TIMING CHAIN CASE OIL SEAL

a.
A369431C01
1.854,1.24 2.417,0.896 true 2.458,0.792 2.771,0.948 0.313,0.156 10 true *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain case oil seal.

NOTICE:

After removal, check the crankshaft for damage. If it is damaged, smooth the surface with a 400-grit sandpaper.