Home › Engine / Hybrid System › 2GR-FKS (ENGINE MECHANICAL) › CYLINDER HEAD › from 2016.11
RM3160E _51 Engine / Hybrid System _060157 2GR-FKS ENGINE MECHANICAL _0298900 CYLINDER HEAD A

2GR-FKS ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A366177C01
1.344,0.281 1.833,0.281 1.833,0.281 1.552,1.104 true 2.115,1.844 2.469,1.844 false 0.177,1.323 0.323,1.229 false 1.885,0.208 2.344,0.406 0.458,0.198 10 false SST 2.521,1.76 2.833,1.917 0.313,0.156 10 false *a 0.021,1.271 0.333,1.427 0.313,0.156 10 false *a
*a Wooden Block


Using SST and wooden blocks, compress the inner compression spring and remove the 6 valve spring retainer locks from the valve spring retainer.

SST
09202-70020  (09202-01010, 09202-01020)
09202-00021  

HINT:

Arrange the removed parts in such a way that they can be reinstalled to their original locations.



b.

Remove the 6 valve spring retainers, 6 inner compression springs and 6 intake valves from the cylinder head LH.

HINT:

Arrange the removed parts in such a way that they can be reinstalled to their original locations.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A366178C01
2.104,1.177 1.625,0.313 1.625,0.313 2.188,0.438 true 2.552,2.021 2.844,2.021 false 1.323,0.229 1.781,0.427 0.458,0.198 10 false SST 2.917,1.927 3.229,2.083 0.313,0.156 10 false *a
*a Wooden Block


Using SST and wooden blocks, compress the inner compression spring and remove the 6 valve spring retainer locks from the valve spring retainer.

SST
09202-70020  (09202-01010, 09202-01020)
09202-00021  

HINT:

Arrange the removed parts in such a way that they can be reinstalled to their original locations.



b.

Remove the 6 valve spring retainers, 6 inner compression springs and 6 exhaust valves from the cylinder head LH.

HINT:

Arrange the removed parts in such a way that they can be reinstalled to their original locations.



Hide 13711E 3.REMOVE INTAKE VALVE STEM OIL SEAL

a.
A366179

Using needle-nose pliers, remove the 6 intake valve stem oil seals from the intake valve guide bush.


Hide 13715A 4.REMOVE EXHAUST VALVE STEM OIL SEAL

HINT:

Use the same procedure as for the intake side.


Hide 13734 5.REMOVE VALVE SPRING SEAT

a.
A366180

Using compressed air and a Magnet Hand, remove the 12 valve spring seats by blowing air onto them from the cylinder head LH.

HINT:

Arrange the removed parts in such a way that they can be reinstalled to their original locations.



Hide 11117E 6.REMOVE NO. 1 STRAIGHT SCREW PLUG

NOTICE:

If coolant leaks from a No. 1 straight screw plug or a plug is corroded, replace it.


a.
A366181

Using a 10 mm hexagon socket wrench, remove the 2 No. 1 straight screw plugs and 2 water hole gaskets from the cylinder head LH.


Hide 11117F 7.REMOVE NO. 2 STRAIGHT SCREW PLUG

NOTICE:

If coolant leaks from a No. 2 straight screw plug or a plug is corroded, replace it.


a.
A366182

Using a 14 mm hexagon wrench, remove the No. 2 straight screw plug and cylinder head screw plug gasket from the cylinder head LH.


Hide 11117G 8.REMOVE NO. 3 STRAIGHT SCREW PLUG

NOTICE:

If coolant leaks from a No. 3 straight screw plug or a plug is corroded, replace it.


a.
A366165

Using a 10 mm hexagon socket wrench, remove the 4 No. 3 straight screw plugs and 4 cylinder head screw plug gaskets from the cylinder head LH.