Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY › from 2016.11
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0106947 REAR LIGHT ASSEMBLY G

LIGHTING (EXT)  REAR LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81590A 1.INSPECT REAR LIGHT ASSEMBLY LH

E360310C01
0.375,0.563 0.688,0.76 0.313,0.198 10 false *a
*a Component without harness connected
(Rear Light Assembly LH)


a.

Apply battery voltage to the rear light assembly LH and check that the lights illuminate.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 3
Taillight illuminates
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 3
Stop light illuminates


If the result is not as specified, replace the rear light assembly LH or rear light socket and wire LH.


Hide 81580D 2.INSPECT REAR LIGHT ASSEMBLY RH

E360310C01
0.375,0.563 0.688,0.76 0.313,0.198 10 false *a
*a Component without harness connected
(Rear Light Assembly RH)


a.

Apply battery voltage to the rear light assembly RH and check that the lights illuminate.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 3
Taillight illuminates
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 3
Stop light illuminates


If the result is not as specified, replace the rear light assembly RH or rear light socket and wire RH.