Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY › from 2016.11
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0299020 HEADLIGHT ASSEMBLY A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY  DISASSEMBLY  


PROCEDURE

Hide 81110B 1.REMOVE NO. 1 HEADLIGHT BULB

a.
E356398

Turn the back cover assembly as shown in the illustration to remove it.


b.
E356400

Disconnect the connector.


c.
E356402

Turn the No. 1 headlight bulb as shown in the illustration to remove it.

NOTICE:

Do not touch the bulb glass.



Hide 81110D 2.REMOVE NO. 2 HEADLIGHT BULB

a.
E356399

Turn the back cover assembly as shown in the illustration to remove it.


b.
E356401

Disconnect the connector.


c.
E356403

Turn the No. 2 headlight bulb as shown in the illustration to remove it.

NOTICE:

Do not touch the bulb glass.



Hide 81510C 3.REMOVE FRONT TURN SIGNAL LIGHT BULB

a.
E356410

Turn the headlight cord with the front turn signal light bulb as shown in the illustration to disconnect them as a unit.


b.

Remove the front turn signal light bulb from the headlight cord.


Hide 85662 4.REMOVE HEADLIGHT LEVELING MOTOR (w/ Headlight Leveling)

a.
E356412

Disconnect the connector.


b.
E356413C01
1.396,1.083 1.813,0.667 true 1.854,0.583 2.167,0.74 0.313,0.156 10 true *a 0.823,0.719 0.979,0.917 0.156,0.198 10 true 1 2.208,1.792 2.365,1.99 0.156,0.198 10 true 2
*a Aiming Screw


Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

HINT:
·

Turn the aiming screw until the headlight leveling motor can be moved in the direction indicated by the arrow (2) shown in the illustration.

·

Make sure to remember the number of aiming screw rotations.




c.

Turn the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to disengage the pin.


d.
E356414C01
1.406,1.083 1.823,0.667 true 1.865,0.563 2.177,0.719 0.313,0.156 10 true *a 0.792,0.792 0.948,0.99 0.156,0.198 10 true 3 1.521,1.76 1.677,1.958 0.156,0.198 10 true 4
*a Aiming Screw


Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration to disengage the shaft.

HINT:

Make sure to remember the number of aiming screw rotations.



e.

Pull out the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to remove it.