Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY › from 2016.11
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0299020 HEADLIGHT ASSEMBLY A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 85662 1.INSTALL HEADLIGHT LEVELING MOTOR (w/ Headlight Leveling)

a.
E356415C01
1.406,1.125 1.823,0.708 true 1.844,0.604 2.156,0.76 0.313,0.156 10 true *a 1.333,1.833 1.49,2.031 0.156,0.198 10 true 1 0.854,0.688 1.01,0.885 0.156,0.198 10 true 2
*a Aiming Screw


Insert the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.


b.

Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to engage the shaft.

HINT:

Turn the aiming screw the same number of times as it was turned during removal.



c.
E356416C01
1.417,1.094 1.833,0.677 true 1.875,0.563 2.188,0.719 0.313,0.156 10 true *a 2.125,1.865 2.281,2.063 0.156,0.198 10 true 3 0.865,0.719 1.021,0.917 0.156,0.198 10 true 4
*a Aiming Screw


Turn the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration and engage the pin to install the headlight leveling motor to the headlight unit.


d.

Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration.

HINT:

Turn the aiming screw the same number of times as it was turned during removal.



e.
E356412

Connect the connector.


Hide 81510C 2.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.

Install the front turn signal light bulb to the headlight cord.


b.
E356411

Turn the headlight cord with the front turn signal light bulb as shown in the illustration to connect them as a unit.


Hide 81110D 3.INSTALL NO. 2 HEADLIGHT BULB

a.
E356405

Turn the No. 2 headlight bulb as shown in the illustration to install it.

NOTICE:

Do not touch the bulb glass.



b.
E356407

Connect the connector.


c.
E356409C01
2.625,0.74 2.906,1.073 true 2.938,1 3.25,1.198 0.313,0.198 10 true *a
*a Lock Mark


Turn the back cover assembly as shown in the illustration until the lock marks are aligned to install it.


Hide 81110B 4.INSTALL NO. 1 HEADLIGHT BULB

a.
E356404

Turn the No. 1 headlight bulb as shown in the illustration to install it.

NOTICE:

Do not touch the bulb glass.



b.
E356406

Connect the connector.


c.
E356408C01
2.635,1.115 2.323,0.688 true 2.656,1.031 2.969,1.229 0.313,0.198 10 true *a
*a Lock Mark


Turn the back cover assembly as shown in the illustration until the lock marks are aligned to install it.