| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Camshaft bearing cap x Camshaft housing sub-assembly LH and Cylinder head LH | Bolt (A) | 28 | 286 | 21 | ||
| Bolt (B) | 16 | 163 | 12 | |||
| Camshaft timing gear assembly x No. 3 camshaft sub-assembly | 95 | 969 | 70 | |||
| Camshaft timing exhaust gear assembly x No. 4 camshaft sub-assembly | 95 | 969 | 70 | |||
| No. 3 chain tensioner assembly x Camshaft housing sub-assembly LH | 21 | 214 | 15 | |||
| Camshaft bearing cap x Camshaft housing sub-assembly and Cylinder head sub-assembly | Bolt (A) | 28 | 286 | 21 | ||
| Bolt (B), (C) | 16 | 163 | 12 | |||
| Camshaft timing gear assembly x Camshaft | 95 | 969 | 70 | |||
| Camshaft timing exhaust gear assembly x No. 2 camshaft | 95 | 969 | 70 | |||
| No. 2 chain tensioner assembly x Camshaft housing sub-assembly | 21 | 214 | 15 | |||
| No. 1 chain tensioner assembly x Cylinder head sub-assembly | 10 | 102 | 7 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Oil pan sub-assembly x Cylinder block sub-assembly | Bolt (A) | 10 | 102 | 7 | ||
| Bolt (B), (C), (D) | 21 | 214 | 15 | |||
| Nut | 21 | 214 | 15 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Crankshaft pulley x Crankshaft | 260 | 2651 | 192 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Drive plate and ring gear sub-assembly x Crankshaft | 83 | 846 | 61 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| No. 1 Engine hanger and No. 2 Engine hanger x Cylinder head sub-assembly and cylinder head LH | 33 | 337 | 24 | ||||
| Engine mounting bracket RH x Cylinder block sub-assembly | 54 | 551 | 40 | ||||
| Rear engine mounting insulator x Engine assembly with transaxle | 75 | 765 | 55 | ||||
| Engine mounting insulator RH x Engine assembly with transaxle | 95 | 969 | 70 | ||||
| Engine mounting insulator LH x Engine assembly with transaxle | 95 | 969 | 70 | ||||
| Front engine mounting insulator assembly x Engine assembly with transaxle | 87 | 887 | 64 | ||||
| Rear engine mounting insulator x Front frame assembly | 58 | 591 | 43 | ||||
| Front engine mounting insulator assembly x Front frame assembly | 58 | 591 | 43 | ||||
| Engine mounting insulator RH x Front frame assembly | 99 | 1010 | 73 | ||||
| Engine mounting insulator LH x Front frame assembly | 99 | 1010 | 73 | ||||
| Frame side plate sub-assembly RH and frame side plate sub-assembly LH x Front frame assembly and vehicle body | Bolt (A) | 85 | 867 | 63 | |||
| Bolt (B) and Nut (A) | 32 | 326 | 24 | ||||
| Front suspension member bracket sub-assembly RH and front suspension member bracket sub-assembly LH x Front frame assembly and vehicle body | Bolt (C) | 85 | 867 | 63 | |||
| Bolt (D) and Nut (B) | 32 | 326 | 24 | ||||
| Flywheel housing under cover x Oil pan sub-assembly | 10 | 102 | 7 | ||||
| No. 1 exhaust pipe support bracket x Oil pan sub-assembly | 21 | 214 | 15 | ||||
| Engine room main wire with engine wire x Positive (+) battery terminal | 7.5 | 76 | 66 | ||||
| No. 3 earth wire x Transaxle assembly | 8.5 | 87 | 75 | ||||
| Engine wire x Engine room relay block assembly | 8.5 | 87 | 75 | ||||
| Earth wire x Vehicle body | 8.5 | 87 | 75 | ||||
| Transmission oil thermostat x Oil cooler stay | 19.5 | 199 | 14 | ||||
| Engine moving control rod x Vehicle body | 38 | 387 | 28 | ||||
| Engine moving control rod bracket x No. 1 front engine mounting bracket LH | 38 | 387 | 28 | ||||
| Engine moving control rod x Engine moving control rod bracket | 52 | 530 | 38 | ||||
| No. 2 engine mounting stay RH x Engine moving control rod bracket | 38 | 387 | 28 | ||||
| No. 2 engine mounting stay RH x No. 1 front engine mounting bracket LH | 23 | 235 | 17 | ||||
| Air cleaner bracket x Vehicle body | 8.0 | 82 | 71 | ||||
| Air cleaner assembly with air cleaner hose x Vehicle body | 5.0 | 51 | 44 | ||||
| Inlet air cleaner assembly x Vehicle body | 8.0 | 82 | 71 | ||||
| Battery clamp x Bolt and Nut | 5.4 | 55 | 48 | ||||
| Cable x Positive (+) battery terminal | 6.5 | 66 | 58 | ||||
| Cable x Negative (-) battery terminal | 6.5 | 66 | 58 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Water inlet pipe x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Cylinder head LH x Cylinder block sub-assembly | 1st | 36 | 367 | 27 | |||
| 2nd | Turn 90° | ||||||
| 3rd | Turn 90° | ||||||
| Cylinder head LH x Cylinder block sub-assembly | 30 | 306 | 22 | ||||
| Cylinder head sub-assembly x Cylinder block sub-assembly | 1st | 36 | 367 | 27 | |||
| 2nd | Turn 90° | ||||||
| 3rd | Turn 90° | ||||||
| Rear engine oil seal retainer x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Sensor wire x Cylinder head LH and cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Camshaft bearing cap x Camshaft housing sub-assembly LH | 16 | 163 | 12 | ||||
| Camshaft housing sub-assembly LH x Cylinder head LH | 28 | 286 | 21 | ||||
| No. 3 chain tensioner assembly x Camshaft housing sub-assembly LH | 21 | 214 | 15 | ||||
| Camshaft timing gear assembly x No. 3 camshaft sub-assembly | 95 | 969 | 70 | ||||
| Camshaft timing exhaust gear assembly x No. 4 camshaft sub-assembly | 95 | 969 | 70 | ||||
| Camshaft bearing cap x Camshaft housing sub-assembly | 16 | 163 | 12 | ||||
| Camshaft housing sub-assembly x Cylinder head sub-assembly | 28 | 286 | 21 | ||||
| No. 2 chain tensioner assembly x Camshaft housing sub-assembly | 21 | 214 | 15 | ||||
| Camshaft housing sub-assembly x Cylinder head | 28 | 286 | 21 | ||||
| Camshaft bearing cap x Camshaft housing sub-assembly | 16 | 163 | 12 | ||||
| Camshaft timing gear assembly x Camshaft | 95 | 969 | 70 | ||||
| Camshaft timing exhaust gear assembly x No. 2 camshaft | 95 | 969 | 70 | ||||
| No. 1 chain vibration damper x Cylinder head LH and cylinder block sub-assembly | 22.5 | 229 | 17 | ||||
| Idle sprocket assembly x Cylinder block sub-assembly | 60 | 612 | 44 | ||||
| No. 1 chain tensioner assembly x Cylinder head sub-assembly | 10 | 102 | 7 | ||||
| Engine water pump assembly x Timing chain cover assembly | 11 | 112 | 8 | ||||
| Timing chain cover plate x Timing chain cover assembly | 11 | 112 | 8 | ||||
| No. 1 oil pan baffle plate x Crankshaft bearing cap set bolt | 10 | 102 | 7 | ||||
| Stud bolt x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Stud bolt x Oil pan sub-assembly | 4.0 | 41 | 35 | ||||
| Stud bolt x Oil pan sub-assembly | 10 | 102 | 7 | ||||
| Oil strainer sub-assembly x Timing chain cover assembly | 10 | 102 | 7 | ||||
| Stud bolt x Oil pan sub-assembly | 4.0 | 41 | 35 | ||||
| Oil pan sub-assembly x No. 2 oil pan sub-assembly | 10 | 102 | 7 | ||||
| Oil pan drain plug x No. 2 oil pan sub-assembly | 40 | 408 | 30 | ||||
| Cylinder head cover sub-assembly LH and VVT sensor x Camshaft housing sub-assembly LH | 10 | 102 | 7 | ||||
| No. 1 V-bank cover bracket x Cylinder head cover sub-assembly LH | 10 | 102 | 7 | ||||
| Cylinder head cover sub-assembly and VVT sensor x Camshaft housing sub-assembly | 10 | 102 | 7 | ||||
| Water outlet x Cylinder head sub-assembly and cylinder head LH | 10 | 102 | 7 | ||||
| Stud bolt x No. 1 oil cooler bracket | 10 | 102 | 7 | ||||
| Stud bolt x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Oil cooler pipe x No. 1 oil cooler bracket | 21 | 214 | 15 | ||||
| No. 1 oil cooler bracket with oil cooler pipe x Cylinder block sub-assembly and oil pan sub-assembly | 21 | 214 | 15 | ||||
| Stud bolt x Front No. 1 engine mounting bracket LH | 10 | 102 | 7 | ||||
| Front No. 1 engine mounting bracket LH x Timing chain cover assembly | 54 | 551 | 40 | ||||
| Cylinder block water drain cock sub-assembly x Cylinder block sub-assembly | 25 | 255 | 18 | ||||
| Cylinder block water drain cock plug x Cylinder block water drain cock sub-assembly | 12.7 | 130 | 9 | ||||
| Taper screw plug x Cylinder block sub-assembly | 25 | 255 | 18 | ||||
| Radiator pipe clamp x Camshaft housing sub-assembly LH | 5.5 | 56 | 49 | ||||
| Wire harness clamp bracket x camshaft housing sub-assembly | 8.4 | 86 | 74 | ||||
| Wire harness clamp bracket x Cylinder head cover LH | 8.4 | 86 | 74 | ||||
| Wire harness clamp bracket x Camshaft housing sub-assembly | 13 | 133 | 10 | ||||
| Rear engine mounting bracket x Cylinder block sub-assembly | 64 | 653 | 47 | ||||
| Engine oil level dipstick guide x Camshaft housing sub-assembly LH | 21 | 214 | 15 | ||||
| No. 1 compressor mounting bracket x Cylinder block sub-assembly | 43 | 438 | 32 | ||||
| Sensor wire x Cylinder head sub-assembly | 10 | 102 | 7 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Stud bolt x Cylinder head LH | Bolt (A) and (B) | 10 | 102 | 7 | |||
| Bolt (C) | 4.0 | 41 | 35 | ||||
| No. 3 straight screw plug x Cylinder head LH | 65 | 663 | 48 | ||||
| No. 2 straight screw plug x Cylinder head LH | 80 | 816 | 59 | ||||
| No. 1 straight screw plug x Cylinder head LH | 44 | 449 | 32 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Stud bolt x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| No. 1 oil nozzle sub-assembly x Cylinder block sub-assembly | 9.0 | 92 | 80 | ||||
| Crankshaft bearing cap x Cylinder block sub-assembly | 1st | 61 | 622 | 45 | |||
| 2nd | Turn 90° | ||||||
| Cylinder block sub-assembly x Crankshaft bearing cap | 51.5 | 525 | 38 | ||||
| Connecting rod cap x Connecting rod | 1st | 24.5 | 250 | 18 | |||
| 2nd | Turn 90° | ||||||