Home › Drivetrain › UA80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › DIFFERENTIAL CASE › from 2016.11
RM3160E _52 Drivetrain _060165 UA80F AUTOMATIC TRANSMISSION / TRANSAXLE _0299150 DIFFERENTIAL CASE A

UA80F AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 43410M 1.REMOVE FRONT DRIVE SHAFT OIL SEAL RH

a.
C362592N01
1.615,1.021 2.135,0.667 false 2.198,0.594 2.656,0.792 0.458,0.198 10 false SST

Hold the differential case assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Using SST, remove the front drive shaft oil seal RH from the differential case assembly.

SST
09308-00010  

NOTICE:

Be careful not to damage the oil seal installation surface of the differential case assembly.



Hide 41311F 2.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (OUTER RACE)

a.
C362594N01
0.396,0.865 0.792,1.042 false 0.063,0.771 0.521,0.969 0.458,0.198 10 false SST

Using SST, remove the front differential case rear tapered roller bearing (outer race) from the automatic transaxle case sub-assembly.

SST
09308-36010  

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.


HINT:
C362595

Align the claw of the SST with the indentation of the automatic transaxle case sub-assembly when removing the parts.



Hide 41311F 3.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (INNER RACE)

a.
C362597N01
0.833,0.604 1.24,0.667 false 0.656,2.167 1.635,1.875 true 0.542,0.531 1,0.729 0.458,0.198 10 false SST 0.333,2.094 0.792,2.292 0.458,0.198 10 false SST

Using SST, remove the front differential case rear tapered roller bearing (inner race) from the differential case assembly.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04030, 09954-04020, 09955-04011, 09957-04010, 09958-04011)
09950-60010  (09951-00340, 09951-00440, 09952-06010)

NOTICE:

Because SST is attached to the roller portion, there is a possibility that the roller portion could break and SST could come off before the front differential case rear tapered roller bearing (inner race) comes off.



b.
C362598N01
0.792,0.583 1.198,0.646 false 0.615,2.115 1.573,1.854 true 0.479,0.51 0.938,0.708 0.458,0.198 10 false SST 0.271,2.042 0.729,2.24 0.458,0.198 10 false SST

If the roller portion breaks and SST comes off, reattach SST to the inner race in the position shown in the illustration, and continue removing the parts.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04030, 09954-04020, 09955-04011, 09957-04010, 09958-04011)
09950-60010  (09951-00340, 09951-00440, 09952-06010)


Hide 41311E 4.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (OUTER RACE)

a.
C362600N01
1.604,1.01 2.385,1.292 false 1.25,0.927 1.708,1.125 0.458,0.198 10 false SST

Using SST, remove the front differential case front tapered roller bearing (outer race) and differential drive pinion shim from the transaxle housing.

SST
09308-36010  

NOTICE:

Be careful not to damage the transaxle housing.


HINT:
C362602

Align the claw of the SST with the indentation of the transaxle housing when removing the parts.



Hide 41311E 5.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (INNER RACE)

a.
C362605N01
1.094,0.438 1.719,0.24 false 1.594,2.156 2.229,2.458 true 0.865,1.563 0.375,1.385 true 1.781,0.167 2.24,0.365 0.458,0.198 10 false SST 2.302,2.406 2.76,2.604 0.458,0.198 10 false SST 0.052,1.302 0.51,1.5 0.458,0.198 10 false SST

Using SST, remove the front differential case front tapered roller bearing (inner race) from the differential case assembly.

SST
09950-00020  
09950-00030  
09950-60010  (09951-00440)