Home › General › SPECIFICATIONS › 2GR-FKS COOLING › from 2016.11
RM3160E _V1 General _019682 SPECIFICATIONS _0294997 2GR-FKS COOLING F

SPECIFICATIONS  2GR-FKS COOLING  TORQUE SPECIFICATIONS  


COOLANT
Part Tightened N*m kgf*cm ft.*lbf
Cylinder block drain cock plug 12.7 130 9

WATER PUMP
Part Tightened N*m kgf*cm ft.*lbf
Water pump x Timing chain cover sub-assembly for bolt (A) 43 438 32
for bolt (B) 21 214 15
for bolt (C) 11 112 8
Water pump pulley x Water pump without a union nut wrench 21 214 15
with a union nut wrench 19 194 14
No. 2 idler pulley sub-assembly x Timing chain cover sub-assembly 54 551 40

THERMOSTAT
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Water inlet with thermostat sub-assembly x Timing chain cover sub-assembly 10 102 7
Front No. 1 engine mounting bracket LH x Timing chain cover sub-assembly for bolt (A) with SST 54 551 40
without SST 34 347 25
for bolt (B) 54 551 40
for bolt (C) with SST 54 551 40
without SST 29 296 21
Engine wire x Timing chain cover sub-assembly 8.4 86 74

COOLING FAN MOTOR
Part Tightened N*m kgf*cm in.*lbf
Cooling fan motor LH x Fan shroud 3.9 40 35
Cooling fan motor RH x Fan shroud 3.9 40 35
Fan LH x Cooling fan motor LH 6.3 64 56
Fan RH x Cooling fan motor RH 6.3 64 56