RM3160E
_V1
General
_019682
SPECIFICATIONS
_0095386
DRIVE SHAFT / PROPELLER SHAFT
F
SPECIFICATIONS DRIVE SHAFT / PROPELLER SHAFT SERVICE DATA
Front Drive Shaft Assembly (for 1AR-FE)
| Item
|
Capacity
|
| Outboard joint grease
|
174 g (6.14 oz)
|
| Inboard joint grease
|
145 g (5.11 oz)
|
Front Drive Shaft Assembly (for 2GR-FKS)
| Item
|
Capacity
|
| Outboard joint grease
|
164 to 174 g (5.79 to 6.13 oz)
|
| Inboard joint grease
|
195 to 205 g (6.88 to 7.23 oz)
|
Rear Drive Shaft Assembly (for AWD)
| Item
|
Capacity
|
| Outboard joint grease
|
50 to 60 g (1.77 to 2.11 oz)
|
| Inboard joint grease
|
93 to 103 g (3.29 to 3.63 oz)
|
Propeller Shaft Assembly
| Intermediate shaft assembly runout
|
Maximum runout: 0.4 mm (0.0157 in.)
|
| Universal joint flange runout (for front side)
|
Maximum runout: 0.1 mm (0.00394 in.)
|
| Universal joint flange runout (for rear side)
|
Maximum runout: 0.1 mm (0.00394 in.)
|
| Propeller shaft assembly runout
|
Maximum runout: 0.4 mm (0.0157 in.)
|
| Rear propeller shaft assembly runout
|
Maximum runout: 0.4 mm (0.0157 in.)
|
| No. 1 Joint Angle
|
-3.02° to -1.02°
|
| No. 4 Joint Angle
|
071° to 2.71°
|
| No. 2 center support bearing washer
|
Thickness
|
3.2 mm (0.126 in.)
|
| 4.5 mm (0.177 in.)
|
| 6.5 mm (0.256 in.)
|
| 9.0 mm (0.354 in.)
|
| 11.0 mm (0.433 in.)
|
| 13.5 mm (0.531 in.)
|
| 15.5 mm (0.610 in.)
|
| 17.5 mm (0.689 in.)
|