Home › Engine / Hybrid System › 2GR-FKS LUBRICATION › OIL PRESSURE SWITCH › from 2016.11
RM3160E _51 Engine / Hybrid System _060162 2GR-FKS LUBRICATION _0299637 OIL PRESSURE SWITCH G

2GR-FKS LUBRICATION  OIL PRESSURE SWITCH  INSPECTION  


PROCEDURE

Hide 83530 1.INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.
A368172C01
2.01,0.958 2.177,0.542 2.177,0.542 2.427,0.542 true 2.458,0.427 2.698,0.615 0.24,0.188 10 true *1
*1 Wire Harness Protector


Disconnect the wire harness protector.


b.

Disconnect the engine oil pressure switch assembly connector.


c.

Start the engine.


d.
A159695

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Switch body Idling 10 kΩ or higher
Engine stopped Below 1 Ω


If the result is not as specified, replace the engine oil pressure switch assembly.


e.

Connect the engine oil pressure switch assembly connector.


f.

Connect the wire harness protector.