Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM (for 4 Sensor Type) › from 2016.11
RM3160E _56 Audio / Visual / Telematics _019702 PARK ASSIST / MONITORING _0109512 TOYOTA PARKING ASSIST-SENSOR SYSTEM(for 4 Sensor Type) W

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM(for 4 Sensor Type)  CUSTOMIZE PARAMETERS  


CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM


a.

Customizing with the GTS

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the back sonar or clearance sonar switch assembly on.


iv.

Turn the GTS on.


v.

Enter the following menus: Body Electrical / Clearance Sonar / Utility / Customize Setting.


vi.

Select the setting by referring to the table below.

Warning
Tester Display Description Default Setting ECU
Rr Sensor Onset Range Sets the detection operation range for the rear center sensors. Wide 0:Narrow,1:Wide Clearance warning ECU assembly
Keep Sense Buzzer Sounds the buzzer when the distance between the vehicle and an obstacle does not change for more than 3 seconds. Avail 0:Not Avail,1:Avail Clearance warning ECU assembly
Fr & Rr Buzzer Volume Changes the buzzer volume setting. M2 001:L,010:M1,011:M2,100:M3,101:H Clearance warning ECU assembly
Temporary Mute Reset Speed Adjust Sets the vehicle speed at which the temporary mute function resets. 20 km/h 00:System Link,01:15km/h,10:20km/h,11:30km/h Clearance warning ECU assembly
Temporary Mute Function Sets the availability of the temporary mute function. ON 0:OFF,1:ON Clearance warning ECU assembly
50006 7
Sensor
Tester Display Description Default Setting ECU
Sensor Condition N Makes the front sensors available when the shift lever is in N. Avail 0:Not Avail,1:Avail Clearance warning ECU assembly
Non P/R Range Rear Sensor Changes the operation setting for the rear sensors when the shift lever is in any position other than P or R. R Stop 00:R,01:Rcrn,10:R Stop Clearance warning ECU assembly
50006 13
Display
Tester Display Description Default Setting ECU
Display Mode The display mode setting (when the Toyota parking assist-sensor system is normal). All 01:All,11:Undisp Clearance warning ECU assembly
50006 14


b.

Customizing with multi-display

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Turn the ignition switch to ON.


ii.

Turn the back sonar or clearance sonar switch assembly on.


iii.

Enter the following menus: MENU / Setup / Vehicle / TOYOTA Park Assist.


iv.

Select the setting by referring to the table below.

for Navigation Receiver Type
Display Description Default Setting ECU
Alert Volume Sets the buzzer alert volume. 3 1, 2, 3, 4 or 5 Clearance warning ECU assembly
Display The display mode setting (when the Toyota parking assist-sensor system is normal). Indicator of Display Off not illuminated*1 Indicator of Display Off not illuminated*1 or indicator of Display Off illuminated*2 Clearance warning ECU assembly
Distance
Rear
Sets the detection operation range for the rear center sensors. Green*4 Orange*3 or Green*4 Clearance warning ECU assembly

for Radio and Display Type
Display Description Default Setting ECU
Alert Volume Sets the buzzer alert volume. Level 3 Level 5, Level 4, Level 3, Level 2 or Level 1 Clearance warning ECU assembly
Sonar Display The display mode setting (when the Toyota parking assist-sensor system is normal). On On or Off Clearance warning ECU assembly
Rear Sonar Distance Sets the detection operation range for the rear center sensors. Farther*4 Nearer*3 or Farther*4 Clearance warning ECU assembly

*1: Sonar indication is available on the multi-display

*2: Sonar indication is not available on the multi-display

*3: Detection range of 600 mm (23.6 in.)

*4: Detection range of 1500 mm (59.1 in.)