Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type LH Side) › from 2016.11
RM3160E _58 Vehicle Interior _019713 SEAT BELT _0100665 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type LH Side) G

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type LH Side)  INSPECTION  


PROCEDURE

Hide 73390 1.INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH

a.
B345488C03
0.146,0.115 0.521,0.708 0.375,0.594 10 false *a
*a Component without harness connected
(Rear Seat 3 Point Type Belt Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Rear No. 1 LH seat belt unfastened Below 1 Ω
Rear No. 1 LH seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat 3 point type belt assembly LH.