73380D
1.INSPECT REAR SEAT INNER BELT ASSEMBLY
| *a | Component without harness connected
(Rear Seat Inner Belt Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| i2-2 - i2-5 | Rear No. 1 center seat belt unfastened | Below 1 Ω |
| Rear No. 1 center seat belt fastened | 10 kΩ or higher | |
| i2-1 - C-3 | Always | Below 1 Ω |
| i2-4 - C-2 | Always | Below 1 Ω |
If the result is not as specified, replace the rear seat inner belt assembly.